D-Link DHP-501AV User Manual page 9

Powerline av 500 adapter starter kit

Table of Contents

Section 2 - Installation

5. Adding More Adapters

If you would like to add more than two adapters, press the button on the additional adapter for no more than two seconds. The Power LED will start

blinking after you release the button. Then, press the button on any adapter in your existing PowerLine network for no more than two seconds. The

Power LED will start blinking after you release the button.

Note: Both Simple Connect buttons must be pressed within two minutes. After the above network security setup steps, your PowerLine network will

be securely configured with the same network encryption key.

D-Link DHP-501AV User Manual

Table of Contents