Hardware Overview; Leds - D-Link DHP-501AV User Manual

Section 1 - Product Overview
1
Power LED
2
PowerLine LED
3
Ethernet LED
D-Link DHP-501AV User Manual
Hardware.Overview
• Solid. The device is receiving electrical power.
• Blinking. The device is setting itself up after reset or security button was pressed
or power saving mode enabled.
• Off. The device is not receiving electrical power.
• Solid. The device is connected to a PowerLine network.
• Blinking. The device is transmitting data.
• Off. The device has not found any other compatible PowerLine devices using the
same encryption key.
The color indicates the PowerLine link rate:
• Green. The PowerLine link rate is faster than 80 Mbps.
• Amber. The PowerLine link rate is between 50 Mbps and 80 Mbps.
• Red. The PowerLine link rate is less than 50 Mbps.
• Solid. The Ethernet port is linked but there is no data traffic.
• Blinking. The device is transmitting data.
• Off. There is no Ethernet connection.

LEDs

2 3
1
5