Table of Contents
Advertisement
Add and Configure the Cisco ACS Device in MARS
Table 14-1
Possible Application Log Messages for PN Log Agent (continued)
Type/Message
PnLogAgentService started
PnLogAgentService Exiting
The service read the configuration and will attempt to process files.
As the service has no logs configured, it shall wait for an update
Exiting thread processing file as service stop received!
Add and Configure the Cisco ACS Device in MARS
To add the host and Cisco Secure ACS software application to MARS, follow these steps:
Click Admin > Security and Monitor Devices > Add.
Step 1
From the Device Type list, select Add SW Security apps on a new host.
Step 2
You can also select Add SW Security apps on an existing host if you have already defined the host within
MARS, perhaps as part of the Management >IP Management settings or if you are running another
application on the host, such as Microsoft Internet Information Services.
In the Device Name field, enter the hostname of the server or the remote logging host.
Step 3
Step 4
In the Reporting IP field, enter the IP address of the interface in Cisco Secure ACS server or the remote
logging host from which the syslog messages will originate.
Step 5
Under Enter interface information, enter the interface name, IP address, and netmask value of the
interface in Cisco Secure ACS server or remote logging host from which the syslog messages will
originate.
This address is the same value as the Reporting IP address.
Click Apply.
Step 6
Step 7
Click Next to move the Reporting Applications tab.
User Guide for Cisco Security MARS Local Controller
14-12
Chapter 14
Effect on Service/Cause of Error
Informational messages describing expected operations
for the service.
Configuring AAA Devices
78-17020-01
Advertisement
Table of Contents
Troubleshooting
