How Port Forwarding Differs From Port Triggering; Set Up Port Forwarding To Local Servers - NETGEAR DGN2200v3 User Manual

Your router performs Network Address Translation (NAT) on the source IP address, and
4.
sends this request message through the Internet to the remote computer, which displays the
web page from www.example.com.
To configure port forwarding, you need to know which inbound ports the application needs.
You usually can determine this information by contacting the publisher of the application or
the relevant user groups or news groups.

How Port Forwarding Differs from Port Triggering

The following points summarize the differences between port forwarding and port triggering:
Port triggering can be used by any computer on your network, although only one
•
computer can use it at a time.
Port forwarding is configured for a single computer on your network.
•
With port triggering, the router does not need to know the computer's IP address in
•
advance. The IP address is captured automatically.
Port forwarding requires that you specify the computer's IP address during configuration,
•
and the IP address can never change.
Port triggering requires specific outbound traffic to open the inbound ports, and the
•
triggered ports are closed after a period of no activity.
Port forwarding is always active and does not need to be triggered.
•

Set Up Port Forwarding to Local Servers

Using the port forwarding feature, you can allow certain types of incoming traffic to reach
servers on your local network. For example, you might want to make a local web server, FTP
server, or game server visible and available to the Internet.
Use the Port Forwarding/Port Triggering screen to configure the router to forward specific
incoming protocols to computers on your local network. In addition to servers for specific
applications, you can also specify a default DMZ server to which all other incoming protocols
are forwarded.
Before starting, you need to determine which type of service, application, or game you want
to provide, and the local IP address of the computer that will provide the service. The server
computer has to always have the same IP address.
To ensure that your server computer always has the same IP address,
Tip:
use the reserved IP address feature of your product.
N300 Wireless ADSL2+ Modem Router DGN2200v3
Security Settings
46