NETGEAR DGN2200v3 User Manual page 38

Allow guests to access My Local Network. If you want guests to have access to your
home network instead of just Internet access, then select this check box.
Enable Wireless Isolation. If this check box is selected, then wireless clients (computers or
wireless devices) that join the network can use the Internet, but cannot access each other or
access Ethernet devices on the network.
Guest Wireless Network Name (SSID). Change the network name to one that you will
easily recognize.
Security Options. NETGEAR strongly recommends that you set up wireless security for
your guest network. For information about wireless security, see

To set up a wireless guest network:
Select Setup > Guest Network.
1.
Select the Enable Guest Network check box.
2.
You can specify whether the SSID broadcast is enabled, and whether you want to allow the
3.
guest to access your local network. You can also change the SSID.
NETGEAR strongly recommends that you change the SSID to a different name. Note
•
that the SSID is case-sensitive. For example, GuestNetwork is not the same as
Guestnetwork.
For guest networks, wireless security is disabled by default. NETGEAR strongly
•
recommends that you implement wireless security for the guest network.
Select a security option for the guest network and specify the password.
4.
When you have finished making changes, click Apply.
5.
N300 Wireless ADSL2+ Modem Router DGN2200v3
Wireless Settings
Security Basics
38
on page 30