NETGEAR DGN2200v1 Configuration Manual page 3

Configuration of the VPN Policy on the DSL Gateway:
➎
➏
➍
➌
➋
➊
 From the Router's GUI, go to
VPN policies under Advanced –
VPN.
 Click on Add Auto Policy.
➊
The pre-shared key value
goes here.
This is your Pre-Shared Key.
Here we select "Fully
➋
Qualified Domain Name" and
we give the client a name
This is your Client Identifier.
Here we select "Fully
➌
Qualified Domain Name" and
we give the router a name
This is your Router Identifier.
Here we select "Single
➍
Address" and we specify the
IP.
This is your Client's IP
Address.
Here we select "Subnet
➎ ➏
-
Address" and add the address
and mask of our router.
This is your Router's
Network Address and
Router's Network Mask.

To accept this settings, click
on "Apply"
Version 1.1