1. Manuals
  2. Brands
  3. JETWAY Manuals
  4. Motherboard
  5. 915GDBR3A
  6. User manual

JETWAY 915GDBR3A User Manual

M/b for lga 775 pentium 4 processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
915GDBG/915PDBG
USER'S MANUAL
M/B For LGA 775 Pentium 4 Processor
NO. G03-915GDB
Rev:3.0
Release date: November 2004
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

Advertisement

Table of Contents
loading

Related Manuals for JETWAY 915GDBR3A

Summary of Contents for JETWAY 915GDBR3A

  • Page 1 915GDBG/915PDBG USER'S MANUAL M/B For LGA 775 Pentium 4 Processor NO. G03-915GDB Rev:3.0 Release date: November 2004 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

  • Page 2: Table Of Contents

    TABLE OF CONTENT USER’S NOTICE........................... ii MANUAL REVISION INFORMATION .................... ii COOLING SOLUTIONS ........................ii CHAPTER 1 INTRODUCTION OF 915GDBG/915PDBG MOTHERBOARD FEATURE OF MOTHERBOARD ..................1 SPECIFICATION........................2 PERFORMANCE LIST ......................3 LAYOUT DIAGRAM & JUMPER SETTING ..............4 CHAPTER 2 HARDWARE INSTALLATION HARDWARE INSTALLATION STEPS ................

  • Page 3: User's Notice

    USER’S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.

  • Page 4: Chapter 1 Introduction Of 915Gdbg/915Pdbg Motherboard

    Chapter 1 Introduction of 915GDBG/ 915PDBG Motherboard 1-1 Feature of motherboard The 915GDBG/ 915PDBG motherboard is design for use Intel Pentium 4 Processor in LGA775(Land Grid Array) Socket Prescott Processor with the Intel 915G/915P Chipset delivers a high performance and professional desktop platform solution. Which utilize the design and the memory size expandable to 4.0GB.

  • Page 5: Specification

    1-2 Specification Spec Description ∗ ATX form factor 4 layers PCB size: 30.5x24.5cm Design ∗ Intel 915G Graphics Memory Controller Hub (GMCH) Chipset Chipset for 915GDBG ∗ Intel 915P Memory Controller Hub (MCH) Chipset for 915PDBG ∗ Intel 82801FB I/O Controller Hub (ICH6) Chipset ∗...

  • Page 6: Performance List

    1-3 Performance List The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Performance Test Report CPU:...

  • Page 7: Layout Diagram & Jumper Setting

    1-4 Layout Diagram & Jumper Setting Line-OUT Line-IN Surrback PRINT PS/2 Mouse PS/2 Keyboard COM1 USB2 MIC-IN GEN/LFE SURROUND ATX 12V Power Connector CPU Socket PS2 KB/Mouse Port CPU FAN K/B Power ON Jumper (JP1) DDR DIMMx4 PC99 Back Panel ATX Power Connector Audio Connector ATA 133 IDE Connector...
  • Page 8 Jumpers Jumper Name Description Page CMOS RAM Clear 3-pin Block Keyboard Power On Enable/Disabled 3-pin Block JP3/JP5 USB Power On Enable/Disabled 3-pin Block Connectors Connector Name Description Page ATXPWR ATX Power Connector 24-pin Block P.21 ATX12V ATX 12V Power Connector 4-pin Block P.22 USB2...

  • Page 9: Chapter 2 Hardware Installation

    Chapter 2 Hardware installation 2-1 Hardware installation Steps Before using your computer, you had better complete the following steps: 1. Check motherboard jumper setting 2. Install CPU and Fan 3. Install System Memory (DIMM) 4. Install Expansion cards 5. Connect IDE and Floppy cables, Front Panel /Back Panel cable 6.

  • Page 10: Install Cpu

    (2) Keyboard/USB Power On function Enabled/Disabled: JP1/JP3, JP5 When setting Enabled you can using keyboard by key in password/USB device to power on system. 1-2 closed K/B Power ON Disabled (Default) 2-3 closed K/B Power ON Enabled 1-2 closed USB Power On Disabled (Default) 2-3 closed USB Power On Enabled 1-2 closed USB Power On Disabled (Default) 2-3 closed USB Power On Enabled...

  • Page 11: About Intel Pentium 4 Lga775 Cpu

    2-3-2 About Intel Pentium 4 LGA775 CPU This motherboard provides a 775-pin surface mount, LGA775 Land Grid Array socket, referred to as the LGA775 socket supports Intel Pentium 4 processor in the 775 Pin package utilizes Flip-Chip Land Grid Array (FC-LGA4) package technology. The CPU that comes with the motherboard should have a cooling FAN attached to prevent overheating.

  • Page 12: Lga 775 Cpu Installation Guide

    LGA 775 CPU Installation Guide Socket Preparation Opening the socket: Note: Apply pressure to the corner with right hand thumb while opening/closing the load lever, otherwise lever can bounce back like a “mouse trap” and WILL cause bent contacts (when loaded) Socket Load Plate Open...
  • Page 13 Visually inspect for bent contacts (Recommend at least 1stpass visual inspection) NOTE: Refer to the Handling and Inspection Module for 1stand 2ndpass inspection details. NOTE: Glove images are for illustrative purposes only. Please consult local safety guidelines for specific requirements NOTE: Recommend not to hold the load plate as a lever, instead hold at tab with left hand, removing the PnP cap with right hand...
  • Page 14 775-Land Package Removal Open the Load Plate/Lever with both hands: With left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from LGA775 Socket while pressing on center of PnP cap to assist in removal. Pick up 775-land LGA package: By Vacuum Pen: Place a minimum 9-mm cup at approximately the center of IHS.
  • Page 15 Visually inspect socket contact array 1. First Pass Inspection Scan socket contact array at varying angles noting the presence of any foreign material If foreign material can’t be blown off by compressed air, or mechanical damage (Mode1 or 4) observed, reject the motherboard for further evaluation or socket replacement. 2.
  • Page 16 NOTE: Thermal Solutions that come with IntelR boxed processor use pre-applied thermal interface material Apply Thermal and not grease. Interface Material Remove Heat Sink (HS) from packaging media Place HS onto the LGA775 Socket • Ensure fan cables are oriented on side closest to fan header •...
  • Page 17 Intel Reference Thermal Solution Disassembly Rotate fastener cap. turn to un-lock Pull up fastener cap to un-seat 12 Disconnect fan cable from motherboard header Turn fastener caps (4) counter-clock wise 90degrees to the un-locked position • A flat-bladed screwdriver may be used if required Pull up on fastener caps to unseat Manually remove HS with gentle twist motion.
  • Page 18 Remove the heatsink from the socket Gently push loose thermal interface material (TIM) to center of processor (pictures 2 and 3) Remove pieces with dry cloth (picture 4) Wipe with dry, lint-free cloth to remove most of the material (picture 5) Wet another lint-free cloth with isopropyl alcohol (IPA) and wipe to clean remaining material (picture 6) Be careful to remove material from gaps between processor and load plate...
  • Page 19 Replacing Damaged Fasteners • To prevent damage, avoid setting the thermal solution with the prongs down − Set on heatsink side or with fan down • The plastic fasteners on the heatsink can be replaced. − Use Shop Intel to order spare fasteners −...
  • Page 20 Damaged. Attempts to straighten not recommended Tilt to remove Replacing Fasteners • To replace the fastener − Start with the white prong − Note the “keying” notch feature − Tilt the prong to insert into the heatsink leg. − Holding the white prong without bending it, push the black pin on from the bottom until you hear a single “click”...

  • Page 21: Install Memory

    Click Note: The black pin and white prong will only “snap” on in one orientation − Check to ensure the black pin is rotated properly for installation with the slot perpendicular to the heatsink 2-4 Install Memory This motherboard provides four 184-pin DUAL INLINE MEMORY MODULES (DIMM) sites for memory expansion available from minimum memory size of 64MB to maximum...

  • Page 22: Expansion Card

    Figure 2-4 DIMM1 & DIMM3: Dual Channel 1 DIMM2 & DIMM4: Dual Channel 2 NOTE! When you install DIMM module fully into the DIMM socket the eject tab should be locked into the DIMM module very firmly and fit into its indention on both sides. WARNING! For the DDR SDRAM CLOCK is set at 200MHz, use only DDR400-compliant DDR Modules.

  • Page 23: Assigning Irq For Expansion Card

    Some expansion cards need an IRQ to operate. Generally, an IRQ must exclusively assign to one use. In a standard design, there are 16 IRQs available but most of them are already in use. Standard Interrupt Assignments Priority Standard function System Timer Keyboard Controller Programmable Interrupt...

  • Page 24: Pci Express Slot

    This motherboard provides one 16-lane PCI Express slot intended for Graphics Attach, and two x1 PCI Express Slot. Fully compliant to the PCI Express Base Specification revision 1.0a , support PCI Express VGA card, and other PCI Express device. The x16 PCI Express Slot also supports Advanced Digital Display II Card (ADD2) for digital display and TV-out.
  • Page 25 This is a new defined 4-pins connector that usually comes with ATX Power Supply. The ATX Power Supply which fully support Pentium 4 processor must including this connector for support extra 12V voltage to maintain system power consumption. Without this connector might cause system unstable because the power supply can not provide sufficient current for system.
  • Page 26 Line-OUT Line-IN Surrback PS/2 PRINT Mouse COM1 USB2 PS/2 Keyboard MIC-IN GEN/LFE SURROUND (11) Floppy drive Connector (34-pin block): FDD This connector supports the provided floppy drive ribbon cable. After connecting the single plug end to motherboard, connect the two plugs at other end to the floppy drives. Pin 1 Floppy Drive Connector (12) Primary IDE Connector (40-pin block): IDE1...

  • Page 27: Headers

    IDE 2 Pin 1 • Two hard disks can be connected to each connector. The first HDD is referred to as the “Master” and the second HDD is referred to as the “Slave”. • For performance issues, we strongly suggest you don’t install a CD-ROM or DVD-ROM drive on the same IDE channel as a hard disk.
  • Page 28 (2) USB Port Headers (9-pin) : USB3, USB4 The header is used for connecting the additional USB port plug. By attaching an option USB cable, your can be provided with two additional USB plugs affixed to the back panel. USB4 USB3 Pin 1 Pin 1...
  • Page 29 PWRLED SPEAK JW FP Pin 1 Pin 1 Pin 1 System Case Connections (9) Wake On-LAN Headers (3-pin) : WOL This connector connects to a LAN card with a WAKE ON-LAN output. This connector power up the system when a wake up signal is received through the LAN card. NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
  • Page 30 (11) IR infrared module Headers (5-pin) : IR This connector supports the optional wireless transmitting and receiving infrared module. You must configure the setting through the BIOS setup to use the IR function. Pin 1 IR infrared module Headers (12) CD Audio-In Headers (4-pin) : CDIN CDIN are the connectors for CD-Audio Input signal.

  • Page 31: Starting Up Your Computer

    2-7 Starting Up Your Computer 1. After all connection are made, close your computer case cover. 2. Be sure all the switch are off, and check that the power supply input voltage is set to proper position, usually in-put voltage is 220V∼240V or 110V∼120V depending on your country’s voltage used.

  • Page 32: Chapter 3 Introducing Bios

    Chapter 3 Introducing BIOS The BIOS is a program located on a Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gain control. The BIOS first operates an auto-diagnostic test called POST (power on self test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization.

  • Page 33: The Main Menu

    3-3 The Main Menu Once you enter Award  BIOS CMOS Setup Utility, the Main Menu (Figure 3-1) will appear on the screen. The Main Menu allows you to select from fourteen setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

  • Page 34: Standard Cmos Features

    Load Optimized Defaults Use this menu to load the BIOS default values that are settings for optimal performances system operations. Load Standard Defaults Use this menu to load the BIOS default values that are factory settings for the stable performance system operation. Set Supervisor/User Password Use this menu to set User and Supervisor Passwords.

  • Page 35: Advanced Bios Features

    Time The time format is <hour><minute><second>. Primary Master/Primary Slave Secondary Master/Secondary Slave Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category.
  • Page 36 Anti-Virus Protection Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep. Disabled (default) No warning message to appear when anything attempts to access the boot sector or hard disk partition table.

  • Page 37: Advanced Chipset Features

    Typematic Rate Setting Keystrokes repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be selected. The settings are: Enabled/Disabled. Typematic Rate (Chars/Sec) Sets the number of times a second to repeat a keystroke when you hold the key down. The settings are: 6, 8, 10, 12, 15, 20, 24, and 30.

  • Page 38: Pciexpress Root Port Function

    PCIExpress Root Port Function Please refer to section 3-6-1 System BIOS Cacheable Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in better system performance. However, if any program writes to this memory area, a system error may result. The settings are: Enabled and Disabled. Video RAM Cacheable Select Enabled allows caching of the video BIOS, resulting in better system performance.

  • Page 39: Integrated Peripherals

    3-7 Integrated Peripherals CMOS Setup Utility – Copyright(C) 1984-2004 Award Software Integrated Peripherals > Onboard IDE Function Press Enter Item Help > Onboard Device Function Press Enter > Onboard Super IO Function Press Enter Init Display First PCI Slot Menu Level > Power On Function Button Only KB Power On Password...

  • Page 40: Onboard Device Function

    OnChip IDE Primary/Secondary The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately. The settings are: Enabled and Disabled. Primary/Secondary Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports.

  • Page 41: Onboard Super Io Function

    CMOS Setup Utility – Copyright(C) 1984-2004 Award Software Onboard Super IO Function Onboard FDD Controller Enabled Item Help Onboard Serial Port 1 3F8/IRQ4 Onboard Serial Port 2 2F8/IRQ3 UART2 Mode Select Normal Menu Level >> RxD, TxD Active Hi, Lo IR Transmission Delay Enabled IR Duplex Mode...

  • Page 42: Power Management Setup

    The Power Management Setup allows you to configure your system to most effectively save energy saving while operating in a manner consistent with your own style of computer use. CMOS Setup Utility – Copyright(C) 1984-2004 Award Software Power Management Setup ACPI Function Enabled Item Help...

  • Page 43: Pm Timer Reload Events

    cannot use this function. During Enabled, choose the Date and Time Alarm: Date(of month) Alarm You can choose which month the system will boot up. Set to 0, to boot every day. Time(hh:mm:ss) Alarm You can choose what hour, minute and second the system will boot up. Note: If you have change the setting, you must let the system boot up until it goes to the operating system, before this function will work...

  • Page 44: Pnp/Pci Configuration Setup

    This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.

  • Page 45: Irq Resources

    CMOS Setup Utility – Copyright(C) 1984-2004 Award Software IRQ Resources IRQ-3 assigned to PCI Device Item Help IRQ-4 assigned to PCI Device IRQ-5 assigned to PCI Device IRQ-7 assigned to PCI Device Menu Level >> IRQ-9 assigned to PCI Device IRQ-10 assigned to PCI Device...

  • Page 46: Miscellaneous Control

    This section is for setting CPU Frequency/Voltage Control. CMOS Setup Utility – Copyright(C) 1984-2004 Award Software Miscellaneous Control CPU Clock Ratio Item Help Auto Detect PCI/DIMM Clk Enabled Spread Spectrum Disabled HOST Clock at Next Boot is 100MHz Menu Level > DRAM Clock at Next Boot is Auto CPU Vcore Select...

  • Page 47: Load Standard/Optimized Defaults

    When you press <Enter> on this item, you get confirmation dialog box with a message similar Load Standard Defaults (Y/N)? N Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system operations. Load Optimized Defaults When you press <Enter> on this item, you get a confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N)? N Pressing <Y>...

  • Page 48: Magic Install Supports Windows 2000/Xp

    Check your package and there is A MAGIC INSTALL CD included. This CD consists of all DRIVERS you need and some free application programs and utility programs. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which DRIVERS needed so that your system can function properly.

  • Page 49: Inf Install Intel 915 Chipset System Driver

    1. Click INF in the MAGIC INSTALL MENU 2. Click NEXT when Chipset Software Install Utility appears 3. This license agreement appear, click Yes, the 4. Select if you want computer re-started click readme information appear, click Next Finish 4-2 VGA install Intel 915G VGA Driver 1.

  • Page 50: Sound Install Alc880 Ac97 Codec Audio Driver

    3. Click YES, This is Announce CopyRight 4. If You Want Re-start Computer , Click FINISH 4-3 SOUND install ALC880 AC97 Codec Audio Driver 1. Click SOUND when MAGIC INSTALL 2. Click NEXT When Realtek High Definition MENU appears Audio driver windows appear 3.

  • Page 51: Lan Install Realtek 8110S Giga Ethernet Driver

    5. Speaker configuration setting 6. SPDIF out setting 4-4 LAN install Realtek RTL8110S Gigabit Ethernet NIC Driver 1. Click LAN when Magic Install Menu appear 2. Click finish, and select restart computer 4-5 RAID Install SIS 180 RAID Driver and Utility 1.
  • Page 52 3. When the license agreement windows appear, 4. Please click FINISH and restart your please choose "I accept the terms of the computer license agreement" and click NEXT, then click INSTALL, start install SIS180 RAID Controller Driver Making SATA HDD driver diskette before Install WindowsXP/2000 If you only have Serial ATA HDDs on your system, before you install the Windows XP or Windows 2000, you will need to make a SATA HDD driver diskette before you start to install the Operating System.

  • Page 53: Pc-Health Install Winbond Hardware Doctor Utility

    4-6 PC-HEALTH install Winbond Hardware Doctor Utility 1. Click PC-HEALTH when MAGIC INSTALL 2. Click Next when Install shield wizard Window MENU appears appears, Choose destination location and click Next, select program folder and click next 3. Click FINISH and restart your computer 4.

  • Page 54: Pc-Cillin Install Pc-Cillin2004 Anti-Virus Program

    PC-CILLIN Install PC-CILLIN 2004 Anti-virus program 1. Click PC-CILLIN when MAGIC INSTALL 2. Click NEXT when the "Trend Micro internet MENU appear security" installshield wizard windows appear 3. This is license agreement, select "I Accept 4. Click NEXT and Enter your Customer the terms"...

  • Page 55: How To Update Bios

    7. After PC-CILLIN 2004 complete, Please register your information and we recommend select update item to download newest engine code and virus code Note : Please install ACROBAT READER, Before you read PC-CILLIN 2004 User Manual, the path at X:\acrobat\adberdr6_enu_full.exe 4-8 HOW TO UPDATE BIOS Before update BIOS users have to “Disable”, “Flash Part Write Protect”...

This manual is also suitable for:

915gdbg915pdbg

Table of Contents