1. Manuals
  2. Brands
  3. JETWAY Manuals
  4. Motherboard
  5. 939TURBOR208
  6. User manual

JETWAY 939TURBOR208 User Manual

M/b for socket 939 amd athlon64 processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
939TURBO-D
939TURBO-G / 939TURBO-P
USER'S MANUAL
M/B For Socket 939 AMD Athlon64
Processor
NO. G03939TURBOR208
Rev:2.0
Release date: April 2005
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

Advertisement

Table of Contents
loading

Related Manuals for JETWAY 939TURBOR208

Summary of Contents for JETWAY 939TURBOR208

  • Page 1 939TURBO-D 939TURBO-G / 939TURBO-P USER'S MANUAL M/B For Socket 939 AMD Athlon64 Processor NO. G03939TURBOR208 Rev:2.0 Release date: April 2005 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

  • Page 2: Table Of Contents

    TABLE OF CONTENT USER’S NOTICE........................ii MANUAL REVISION INFORMATION ................ii COOLING SOLUTIONS ......................ii CHAPTER 1 INTRODUCTION OF 939TURBO-D/939TURBO-G/939TURBO-P MOTHERBOARD FEATURE OF MOTHERBOARD ..................1 1-1.1 SPECIAL FEATURES OF MOTHERBOARD............2 SPECIFICATION........................3 PERFORMANCE LIST ......................4 LAYOUT DIAGRAM & JUMPER SETTING ..............5 CHAPTER 2 HARDWARE INSTALLATION HARDWARE INSTALLATION STEPS ................

  • Page 3: User's Notice

    USER’S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE 939TURBO MOTHER- BOARD AND WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE.

  • Page 4: Chapter 1 Introduction Of 939Turbo-D/939Turbo-G/939Turbo-P Motherboard

    Chapter 1 Introduction of 939TURBO-D/939TURBO-G/939TURBO-P Motherboard 1-1 Feature of motherboard The 939TURBO-D/939TURBO-G/939TURBO-P motherboard is designed for use 64bit AMD Athlon64 (K8) Processor in 939 Pin HyperTrnsport Processor with the VIA K8T890 Chipset delivers a high performance and professional desktop platform solution. Which utilize the Socket 939 design and the memory size expandable to 4.0GB.

  • Page 5: 1-1.1 Special Features Of Motherboard

    1-1.1 Special Features of motherboard Bi-turbo Technology ---( Hardware-based Dynamic Over-clocking ) The Bi-turbo Technology offers you dual over-clocking modes. On top of the software based BIOS setting “Current CPU Clock” for over-clocking, the onboard hardware circuitry will monitor the change of CPU current to activate 2 level over-clocking at preset workload level automatically.

  • Page 6: Specification

    1-2 Specification Spec Description Design ATX form factor 4 layers PCB size: 30.5x24.4cm Chipset VIA K8T890 North Bridge Chipset VIA VT8237 South Bridge Chipset Support 64bit AMD Athlon64 939-Pin package utilizes Flip- CPU Socket 939 Chip Pin Grid Array package processor Support CPU Frequency 1GMHz Support up to 3800+ processor Reserves support for future AMD Athlon64 939-pin processors...

  • Page 7: Layout Diagram & Jumper Setting

    The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Performance Test Report CPU:...
  • Page 8 10/100M Giga LAN Surrback PRINTER Line-IN CEN/LFE PS/2 Mouse Line-OUT MIC-IN PS/2 Keyboard Surround COM2 COM1 USB1 CPU Socket PS2 KB/Mouse Port DDR Socket X4 PC99 Back Panel CPU FAN USB Port/ 10/100M LAN Connector SFAN1 USB Port/ Giga LAN Connector ATX Power Connector ATX 12V Power Connector Audio Connector...
  • Page 9 Jumper Name Description Page JBAT CMOS RAM Clear 3-pin Block Keyboard/USB0,1 Power On 3-pin Block Enabled/Disabled On board RealTek LAN Enabled/Disabled 3-pin Block USB Power On Enabled/Disabled 3-pin Block Connectors Connector Name Description Page ATXPWR24P ATX Power Connector 24-pin Block P.13 ATX12V ATX 12V Power Connector...

  • Page 10: Chapter 2 Hardware Installation

    Hardware Installation 2-1 Hardware installation Steps Before using your computer, you had better complete the following steps: 1. Check motherboard jumper setting 2. Install CPU and Fan 3. Install System Memory (DIMM) 4. Install Expansion cards 5. Connect IDE and Floppy cables, Front Panel /Back Panel cable 6.

  • Page 11: Install Cpu

    1-2 closed On Board RealTek LAN Enabled (Default) 2-3 closed On Board RealTek LAN Disabled On Board RealTek LAN Setting (3) Keyboard/USB Power On function Enabled/Disabled: JP1, JP3 1-2 closed KB/USB Power ON Disable 2-3 closed KB/USB Power ON Enabled (Default) Keyboard/Mouse &...

  • Page 12: About Intel Amd K8 939-Pin Cpu

    speakers, MIC, game controllers, and MIDI sound devices. LAN (interface) - Local Area Network - the interface to your local area network. BIOS (Basic Input/Output System) - the program logic used to boot up a computer and establish the relationship between the various components. Driver - software, which defines the characteristics of a device for use by another device or other software.
  • Page 13 This motherboard provides four 184-pin DDR DUAL INLINE MEMORY MODULES (DIMM) sites for DDR memory expansion available from minimum memory size of 64MB to maximum memory size of 4.0GB DDR SDRAM. Valid Memory Configurations Bank 184-Pin DIMM Total Memory Bank 0, 1 (DIMM1) DDRDDR266/DDR333/DDR400 128MB 1.0GB DDR SDRAM Module...

  • Page 14: Expansion Card

    timing issues, if your DDR Modules are not DDR400-compliant, set the SDRAM clock to 133MHz to ensure system stability. 2-5 Expansion Cards WARNING! Turn off your power when adding or removing expansion cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards.

  • Page 15: Interrupt Request Table For This Motherboard

    Slot 1 Slot 2 Slot 3 Onboard USB 1 Onboard USB 2 AC97/MC97 IMPORTANT! If using PCI cards on shared slots, make sure that the drivers support “Shared IRQ” or that the cards don’t need IRQ assignments. Conflicts will arise between the two PCI groups that will make the system unstable or cards inoperable.
  • Page 16 ATX Power Supply connector. This is a new defined 24-pins connector that usually comes with ATX case. The ATX Power Supply allows to use soft power on momentary switch that connect from the front panel switch to 2-pins Power On jumper pole on the motherboard.
  • Page 17 The connectors are 4-pin connector that connect USB devices to the system board. LAN Port connector: UL1/USBLAN This connector is standard RJ45 connector for Network The UL1 support 10M/100Mb/s data transfer rate (not for 939TURBO-G) The USBLAN support 10M/100M/1G b/s data transfer rate (not for 939TURBO-P) Parallel Port Connector (25-pin female): PARALLEL Parallel Port connector is a 25-pin D-Subminiature Receptacle connector.
  • Page 18 Pin 1 Floppy Drive Connector (10) Primary IDE Connector (40-pin block): IDE1 This connector supports the provided IDE hard disk ribbon cable. After connecting the single plug end to motherboard, connect the two plugs at other end to your hard disk(s). If you install two hard disks, you must configure the second drive to Slave mode by setting its jumpers accordingly.

  • Page 19: Headers

    Two hard disks can be connected to each connector. The first HDD is referred to as the “Master” and the second HDD is referred to as the “Slave”. For performance issues, we strongly suggest you don’t install a CD-ROM or DVD-ROM drive on the same IDE channel as a hard disk.
  • Page 20 USB2 USB3 Pin 1 Pin 1 USB Port Headers Speaker connector: SPEAK This 4-pin connector connects to the case-mounted speaker. See the figure below. Power LED: PWR LED The Power LED is light on while the system power is on. Connect the Power LED from the system case to this pin.
  • Page 21 CPUFAN SFAN1 SFAN2 CD Audio-In Headers (4-pin) : CDIN CDIN are the connectors for CD-Audio Input signal. Please connect it to CD-ROM CD-Audio output connector. CDIN CD Audio-In Headers (10) Optical In/Out Header: SPDIF SPDIF Pin 1 SPDIF-Bracket Connector...

  • Page 22: Starting Up Your Computer

    2-7 Starting Up Your Computer 1. After all connection are made, close your computer case cover. 2. Be sure all the switch are off, and check that the power supply input voltage is set to proper position, usually in-put voltage is 220V 240V or 110V 120V depending on your country’s voltage used.

  • Page 23: Chapter 3 Introducing Bios

    Chapter 3 Introducing BIOS The BIOS is a program located on a Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gain control. The BIOS first operates an auto-diagnostic test called POST (power on self test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization.

  • Page 24: The Main Menu

    3-3 The Main Menu Once you enter Award BIOS CMOS Setup Utility, the Main Menu (Figure 3-1) will appear on the screen. The Main Menu allows you to select from fourteen setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

  • Page 25: Standard Cmos Features

    Power User Overclock Settings Use this menu to specify your settings (frequency, Voltage) for overclocking demand Password Settings This entry for setting Supervisor password and User password Load Optimized Defaults Use this menu to load the BIOS default values these are setting for optimal performances system operations for performance use.

  • Page 26: Advanced Bios Features

    Time The time format is <hour><minute><second>. Primary Master/Primary Slave Secondary Master/Secondary Slave Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category.
  • Page 27 Virus Warning Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep. Disabled (default) No warning message to appear when anything attempts to access the boot sector or hard disk partition table.

  • Page 28: Advanced Chipset Features

    Typematic Delay (Msec) Sets the delay time after the key is held down before is begins to repeat the keystroke. The settings are 250, 500, 750, and 1000. Security Option This category allows you to limit access to the system and Setup, or just to Setup. The system will not boot and access to Setup will be denied if the System correct password is not entered at the prompt.

  • Page 29: Dram Timing Settings

    3-6-1 DRAM Timing Settings Phoenix – AwardBIOS CMOS Setup Utility DRAM Timing Settings Timing Mode Auto Item Help DRAM CAS Latency 2.5T SDRAM Cycle Time SDRAM RAS-to-CAS Delay Menu Level >> SDRAM Precharge Time MTRR Mapping Mode Continuous Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Optimized Defaults...

  • Page 30: Ldt & Pci Timing Settings

    3-6-2 LDT & PCI Timing Settings Phoenix – AwardBIOS CMOS Setup Utility LDT & PCI Timing Settings Item Help Upstream LDT Bus Width 16 bit Downstream LDT Bus Width 16 bit LDT Bus Frequency Auto Menu Level >> PCI1 Master 0 WS Write Enabled PCI2 Master 0 WS Write Enabled...

  • Page 31: Onchip Ide Function

    3-7-1 OnChip IDE Function Phoenix – AwardBIOS CMOS Setup Utility OnChip IDE Function SATA Function Enabled Item Help OnChip IDE Channel0 Enabled OnChip IDE Channel1 Enabled Primary Master Auto Menu Level >> Primary Slave Auto Secondary Master PIO Auto Secondary Slave Auto Primary Master UDMA...

  • Page 32: Onchip Device Function

    3-7-2 OnChip Device Function Phoenix – AwardBIOS CMOS Setup Utility OnChip Device Function VIA SATA Function Enabled Item Help (for 939TURBO-D/939TURBO-G only) RealTek LAN BootROM Disabled VIA LAN Function Enabled VIA LAN BootROM Disabled Menu Level >> VIA LAN BootROM Boot Option Hook INT19 VIA LAN BootROM PXERPL Option Current VIA MAC Address is...

  • Page 33: Power Management Setup

    Onboard FDD Controller Select Enabled if your system has a floppy disk controller (FDD) installed on the system board and you wish to use it. If you install add-on FDC or the system has no floppy drive, select Disabled in this field. The settings are: Enabled and Disabled. Onboard Serial Port 1/Port 2 Select an address and corresponding interrupt for the first and the second serial ports.

  • Page 34: Pm Wake Up Events

    ACPI Function This item allows you to Enabled/Disabled the Advanced Configuration and Power Management (ACPI). The settings are Enabled and Disabled. Video Off Option This determines the manner in which the monitor is blanked. The choice are Suspend off, All Modes Off, and Always On.

  • Page 35: 3-8-1.1 Irqs Activities

    Wake Up On Ring/PME During Disabled, the system will ignore any incoming call from the modem. During Enabled, the system will boot up if there’s an incoming call from the modem. Wake-Up on RTC Alarm This function is for setting date and time for your computer to boot up. During Disabled, you cannot use this function.

  • Page 36: Miscellaneous Control

    3-9 Miscellaneous Control This section is for setting CPU Frequency/Voltage Control. Phoenix – AwardBIOS CMOS Setup Utility Miscellaneous Control Auto Detect PCI Clock Enabled Item Help Spread Spectrum Disabled Flash Part Write Protect Enabled Menu Level > > IRQ Resources Press Enter PCI/VGA Palette Snoop Disabled...

  • Page 37: Pc Health Status

    3-10 PC Health Status This section shows the Status of you CPU, Fan, Warning for overall system status. This is only available if there is Hardware Monitor onboard. Phoenix – AwardBIOS CMOS Setup Utility PC Health Status Shutdown Temperature Disabled Item Help Show PCHealth in Post Enabled...

  • Page 38: Biturbo Configuration

    CPU/SFAN1 Smart FAN Full-Speed Temp This item allows you setting the FAN works in full speed when the temperature over the value which out set. If the temperature below the value but over the Idle Temperature, the FAN will works over 60% of full speed, and the higher temperature will gain higher FAN speed, after over the temperature which this item setting, the FAN works in full speed.
  • Page 39 Phoenix – AwardBIOS CMOS Setup Utility BiTurbo Configurations Bi-Turbo Technology Mode Disabled Item Help Bi-Turbo Activated Threshold Bi-Turbo Activated Threshold 60%(CPU Usage) 60%(CPU Usage) ．．．．．[ Bi-Turbo Activated Time 0.50s Later 80%(CPU Usage) ．．．．．[ Bi-Turbo CPU Clock Setting 202MHz Menu Level > 100%(CPU Usage) ．．．．．[ CPU Thermal-Throttling Disabled...
  • Page 40 Bi-Turbo CPU Clock Setting This item allows you to set the CPU Clock which you need to operate after Bi-Turbo is activated. The settings are: 202MHz, 206MHz, 210MHz, 215MHz, 220MHz, 226MHz, 230MHz, 240MHz, 250MHz. Phoenix – AwardBIOS CMOS Setup Utility BiTurbo Configurations BiTurbo Technology Mode Disabled...

  • Page 41: Power User Overclock Settings

    CPU Thermal Throttling Temp This item allows you to activate the CPU Thermal Throttling function when the CPU temperature is over the value which you set to low down the CPU temperature when at high workload to protect processor from damage or accidental shutdown. Phoenix –...
  • Page 42 CPU Vcore 7-Shift This item allows you select the CPU Vcore Voltage xx% more than the standard value, by this function for the precise over-clocking for extra demanding of performance. VDIMM Select This item allows you to select 2.5V of the DDR Module. The choice are: 2.55V, 2.6V, 2.65V, 2.7V.
  • Page 43 Phoenix – AwardBIOS CMOS Setup Utility Power User Overclock Settings Asynchronous AGP/PCI Clock 66.0/33.0 MHz Item Help Linear PCIExpress Clock CPU Vcore 7-Shift Normal ．．．．．[ ** Current CPU Clock 200MHZ ** ．．．．．[ CPU Clock at Next Boot is Menu Level > ．．．．．[ + 10% *** Current DRAM Clock...

  • Page 44: Password Settings

    3-13 Password Settings Phoenix – AwardBIOS CMOS Setup Utility Password Settings Item Help Set Supervisor Password Press Enter Set User Password Press Enter Menu Level > Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Optimized Defaults F7:Standard Defaults You can set either supervisor or user password, or both of them. The differences are: Supervisor password: Can enter and change the options of the setup menus.

  • Page 45: Chapter 4 Driver & Free Program Installation

    Chapter 4 DRIVER & FREE PROGRAM INSTALLATION Check your package and there is A MAGIC INSTALL CD included. This CD consists of all DRIVERS you need and some free application programs and utility programs. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which DRIVERS needed so that your system can function properly.

  • Page 46: Via 4In1 Install Via Service Pack 4 In 1 Driver

    4-1 VIA 4IN1 Install VIA Service Pack 4 IN 1 Driver * The path of the file is X:\VIA\DRIVER\SETUP.EXE IDE : VIA ATAPI VENDOR SUPPORT DRIVER IS USED TO FIXED COMPATIBILITY ISSUE FOR IDE DEVICES AGPVXD : VIA AGPVXD DRIVER IS TO BE INSTALLED, IF YOU ARE USING AN AGP VGA CARD, VIAGART.VXD WILL PROVIDE SERVICE ROUTINES TO YOUR VGA DRIVER AND INTERFACE DIRECTLY TO HARDWARE, PROVIDING FAST GRAPHIC ACCESS...

  • Page 47: Sound

    7. Click NEXT to Install VIA AGP VXD Driver 8. Click NEXT to Install VIA IRQ Routing Mini port Driver 9. Click Finish to restart computer 4-2 SOUND install ALC Audio Codec Driver 1. Click SOUND when MAGIC INSTALL 2. Click NEXT When Realtek High Definition MENU appears Audio driver windows appear...

  • Page 48: Lan Install Realtek 8110S Giga Ethernet Driver

    3. Click FINISH and restart your computer 4. Manual Sound Effect Setting 5. Speaker configuration setting 6. SPDIF out setting 4-3 LAN install Realtek RTL8110S Gigabit Ethernet NIC Driver (for 939TURBO-D/939TURBO-G) 10. Click LAN when Magic Install Menu appear 11. Click finish, and select restart computer...

  • Page 49: Lan2 Install Via 10/100Mb Lan Controller Driver

    4-4 LAN2 Install VIA 10/100MB LAN Controller Driver (for 939TURBO-D/939TURBO-P) The VIA 10/100Mb PCI Ethernet Adapter Driver path is X:\VIA\LANDRV Click LAN when Magic Install Menu appear 2. Setup VIA 10/100Mb PCI Ethernet Driver Driver install Finish, Click Yes and Restart When windows ask VIA 10/100Mb PCI Computer Ethernet Adapter driver path, Change...

  • Page 50: Sata Install Via Serial Ata Driver

    3. Select Install USB Driver and Click NEXT Select FINISH and Restart your Computer 5. Check device working properly in Device Manager The Path of the file is X:\VIA\VIAUSB20\SETUP.EXE 4-6 SATA Install VIA Serial ATA 1. Click SATA when MAGIC INSTALL 2.
  • Page 51 3. When license agreement appear, choose I 4. Select you want to install driver agree and click NEXT 5. Review install driver and utility component, 6. Click FINISH and restart your computer then click NEXT Making SATA HDD driver diskette before Install WindowsXP/2000 If you only have Serial ATA HDDs on your system, before you install the Windows XP or Windows 2000, you will need to make a SATA HDD driver diskette before you start to install the Operating System.

  • Page 52: Pc-Cillin Install Pc-Cillin2004 Anti-Virus Program

    4-7 PC-CILLIN Install PC-CILLIN 2004 Anti-virus program 1. Click PC-CILLIN when MAGIC INSTALL 2. Click NEXT when the "Trend Micro internet MENU appear security" installshield wizard windows appear 3. This is license agreement, select "I Accept 4. Click NEXT and Enter your Customer the terms"...

  • Page 53: How To Disable On-Board Sound

    7. After PC-CILLIN 2004 complete, Please register your information and we recommend select update item to download newest engine code and virus code Note : Please install ACROBAT READER, Before you read PC-CILLIN 2004 User Manual, the path at X:\acrobat\adberdr6_enu_full.exe 4-8 HOW TO DISABLE ON-BOARD SOUND Enter BIOS SETUP choose INTEGRATE PERIPHERALS choose ON-CHIP DEVICE FUNCTION choose AC97 SOUND DEVICE...

  • Page 54: Pro Magic Plus Function Introduction

    Pro Magic Plus- an instant system recovery software tailored to solve these problems for you. It combines various application tools (e.g. anti-virus, backup software, uninstall software, multi-boot software) to satisfy your needs of all sorts of system protections. What functions does Pro Magic Plus have? Instant System Restoration –...

  • Page 55: System Requirements

    NOTE: Functions of each version will differ from each other, and will be based on the function descriptions of each version. System Requirements ◇ First OS must be Windows 98 SE/ME/2000/XP ◇ Support Only Windows OS (No Linux) ◇ Windows server OS and Windows NT not supported ◇...
  • Page 56 APPENDIX Debug Port Post Code Normal POST Codes NOTE: EISA POST codes are typically output to port address 300h. ISA POST codes are output to port address 80h. Code(hex) Name Description Turn Off Chipset OEM Specific-Cache control cache And CPU test Processor Status (1FLAGS) Verification.
  • Page 57 Code(hex) Name Description Reserved Blank video Reset Video controller Reserved Init KBC Keyboard controller init KB test Test the Keyboard Reserved Mouse Init Initialized the mouse Onboard Audio init Onboard audio controller initialize if exist Reserved Reserved CheckSum Check Check the intergraty of the ROM,BIOS and message Reserved Auto detec EEPROM...
  • Page 58 Code(hex) Name Description Reserved Reserved Reserved Reserved PS2 Mouse setup Setup PS2 Mouse and reset KB Reserved Test DMA Controller Test DMA channel 0 Reserved Test DMA Controller Test DMA channel 1 Reserved Test DMA Page Test DMA Page Registers. Registers Reserved Reserved...
  • Page 59 Code(hex) Name Description Memory Test Test all memory of memory above 1MB using Virtual 8086 mode, page mode and clear the memory Reserved Reserved CPU display Detect CPU speed and display CPU vendor specific version string and turn on all necessary CPU features Reserved PnP Init Display PnP logo and PnP early init...

  • Page 60: Quick Post Codes

    Code(hex) Name Description HDD Check for Write HDD check out protection Reserved Reserved POST error check Check POST error and display them and ask for user intervention Reserved Reserved Security Check Ask password security (optional). Write CMOS Write all CMOS values back to RAM and clear screen.
  • Page 61 Code(hex) Name Description Early System setup Check the CPU ID and init L1/L2 cache Initialize first 120 interrupt vectors with SPURIOUS_INT_HDLR and initialize INT 00h-1Fh according to INT_TBL First step initialize if single CPU onboard. Re-init KB If support HPM, HPM get initialized here KBC and CMOS Init Verifies CMOS is working correctly,...

  • Page 62: S4 Post Codes

    Code(hex) Name Description Display POST error Check POST error and display them and ask for user intervention Ask password security (optional). CMOS and Option ROM Write all CMOS values back to RAM and Init clear screen. Enable parity checker Enable NMI, Enable cache before boot. Initialize any option ROMs present from C8000h to EFFFFh.

  • Page 63: Bootblock Post Codes

    Code(hex) Name Description Initialize Video Read CMOS location 14h to find out Interface type of video in use. Detect and Initialize Video Adapter. Video memory test Test video memory, write sign-on message to screen. Setup shadow RAM - Enable shadow according to Setup.

This manual is also suitable for:

939turbo-d939turbo-g939turbo-p939turbo series

Table of Contents