How To Install And Configure Cisco Unified Presence; Starting A Basic Installation - Cisco MCS-7825-H1-IPC1 Installation Manual

How to Install and Configure Cisco Unified Presence

How to Install and Configure Cisco Unified Presence
•
•
•

Starting a Basic Installation

Before You Begin
•
•
Procedure
Step 1 Insert the installation DVD into the tray and restart the server, so it starts from the DVD.
Select Yes to perform a media check after the server completes its boot sequence .
Step 2
Step 3 Perform one of the following actions in the Media Check Result window, after the media check
completes
If the media
check result is: Action:
Pass Select OK to continue the
installation.
Fail Perform the following actions:
Download another copy
a.
from Cisco.com or obtain
another disk directly from
Cisco Systems.
Select OK to continue the
b.
installation.
Select OK to install Cisco Unified Presence.
Step 4
The installation process then verifies RAID configuration and BIOS settings. If the installation process
makes any changes to your hardware configuration settings, you will be prompted to restart your system.
This check does not occur if you install Cisco Unified Presence on a server.
3-2
Starting a Basic Installation, page 2
Configuring the Basic Installation, page 4
Configuring System Time on the Cisco Unified Presence Publisher Server, page 6
Complete the Installation Readiness checklist that contains the prerequisite information and tasks
for your Cisco Unified Presence installation.
If you have a new server with Cisco Unified Presence preinstalled, you do not need to install from
a DVD, unless you want to reimage the server with a later product release. Skip to the procedure that
describes how to enter preexisting installation data.
:
Result
After you select OK, the system installer performs various hardware
checks to ensure your system is correctly configured for Cisco Unified
Presence:
After the hardware checks complete, the Product Deployment Selection
window displays.
Chapter 3
First the installation process checks for the correct drivers, and
–
you may see the following warning:
Drivers not found, do you want to install manually?
Select Yes to continue the installation.
The installation next checks whether you have a supported
–
hardware platform. If your server does not meet the exact
hardware requirements, the installation process fails with a
critical error. If you think this is not correct, capture the error
and report it Cisco Support.
Installing and Configuring Cisco Unified Presence