Cisco TelePresence MSE 8710 Installation Manual
Hide thumbs
Also See for TelePresence MSE 8710:
- Help manual (92 pages) ,
- Help manual (132 pages) ,
- Getting started (12 pages)
Related Manuals for Cisco TelePresence MSE 8710
Summary of Contents for Cisco TelePresence MSE 8710
- Page 1 Cisco TelePresence TelePresence Server MSE 8710 Installation Guide 61-0025-05 August 2013...
-
Page 2: Table Of Contents
Contents General information About the Cisco TelePresence Server MSE 8710 Port and LED locations LED behavior Installing the Cisco TelePresence Server MSE 8710 Task 1: Install the blade in the chassis Task 2: Connect to Ethernet Port A Configuring the Cisco TelePresence Server MSE 8710... -
Page 3: General Information
About the Cisco TelePresence Server MSE 8710 The Cisco TelePresence Server MSE 8710 (TelePresence Server) is a technologically advanced media processor that fits into a Cisco TelePresence MSE 8000 chassis, combining continuous presence high definition video conferencing and the highest possible voice quality. - Page 4 Packets are being transmitted on this port Link Green The speed of the link from this port Power Blue The TelePresence Server is receiving power from the MSE 8000 chassis Cisco TelePresence Server MSE 8710 Installation Guide Page 4 of 12...
-
Page 5: Installing The Cisco Telepresence Server Mse 8710
Task 1: Install the blade in the chassis You must install either a blade or a blanking blade in each of the ten positions in the chassis. The Cisco TelePresence Supervisor MSE 8050 (Supervisor) blade must be installed into slot 1 of the MSE 8000 chassis. - Page 6 Installing the Cisco TelePresence Server MSE 8710 Figure 2: Inserting a blade into the chassis 4. Simultaneously close both retaining latches on the blade (thereby engaging the connectors at the rear of the blade) to secure it in the chassis as shown in the following diagram.
-
Page 7: Task 2: Connect To Ethernet Port A
The power is connected automatically as soon as you close the latches. The LCD panel displays messages as parts are checked and eventually you see “Waiting for application to boot” after which the Cisco logo appears followed by the IP address allocated to the TelePresence Server. -
Page 8: Configuring The Cisco Telepresence Server Mse 8710
TelePresence Server screen licenses must be allocated to the TelePresence Server's slot using the Port licenses page on the Cisco TelePresence Supervisor MSE 8050. Refer to the Supervisor's online help for more details on allocating licenses. Cisco TelePresence Server MSE 8710 Installation Guide... -
Page 9: Configuring The Telepresence Server Software
When you've successfully logged in, you can refer to the TelePresence Server's online help system to guide you through configuration and ongoing maintenance of the system. You can find additional documentation at the Cisco TelePresence Server MSE 8710 support page: http://www.cisco.com/en/US/products/ps11339/tsd_products_support_series_home.html... -
Page 10: Checking For Updates
Checking for updates Checking for updates It is a good idea to regularly check the Cisco web site for updates to the device's main software. This section describes how to upgrade the device using the web interface. To check for, and download, updates: 1. -
Page 11: Troubleshooting And Technical Support Information
Your contact email address or telephone number. A full description of the problem. To view a list of Cisco TelePresence products that are no longer being sold and might not be supported, visit http://www.cisco.com/en/US/products/prod_end_of_life.html and scroll down to the TelePresence section. - Page 12 MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners.