Igmp Multicast Router Port Information; Vrrp Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Command
mrouter
find <IP address>
vlan <1-4095>
port <port number>
trunk <1-12>
dump

IGMP multicast router port information

Command: /info/l3/igmp/mrouter
[IGMP Multicast Router Menu]
The following table describes the commands used to display information about multicast routers learned through
IGMP Snooping.
Table 36 IGMP Multicast Router menu options
Command
vlan <1-4095>
dump

VRRP information

Virtual Router Redundancy Protocol (VRRP) support on GbE2c provides redundancy between routers in a LAN. This is
accomplished by configuring the same virtual router IP address and ID number on each participating VRRP-capable
routing device. One of the virtual routers is then elected as the master, based on a number of priority criteria, and
assumes control of the shared virtual router IP address. If the master fails, one of the backup virtual routers will assume
routing authority and take control of the virtual router IP address.
NOTE: VRRP commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
Command: /info/l3/vrrp
VRRP informa
1: vrid 2, 205.178.18.210, if 1, renter, prio 100, master, server
2: vrid 1, 205.178.18.202, if 1, renter, prio 100, backup
3: vrid 3, 205.178.18.204, if 1, renter, prio 100, master, proxy
When virtual routers are configured, you can view the status of each virtual router using this command. VRRP
information includes:
Virtual router number
Virtual router ID and IP address
Interface number
Ownership status
owner identifies the preferred master virtual router. A virtual router is the owner when the IP address of the
virtual router and its IP interface are the same.
renter identifies virtual routers which are not owned by this device
Priority value. During the election process, the virtual router with the highest priority becomes master.
Activity status
master identifies the elected master virtual router.
backup identifies that the virtual router is in backup mode.
Usage
Displays the Multicast Router Menu.
Displays a single IGMP multicast group by its IP address.
Displays all IGMP multicast groups on a single VLAN.
Displays all IGMP multicast groups on a single port.
Displays all IGMP multicast groups on a single trunk group.
Displays information for all multicast groups.
vlan - Show all multicast router ports on a single vlan
dump - Show all learned multicast router ports
Usage
Displays information for all multicast groups on a single VLAN.
Displays information for all multicast groups learned by the switch.
tion:
Information Menu 52