Using Your Turbo Hub; Connecting A Device Through Wi-Fi - NETGEAR MBR1210-1BMCNS - This Product is a Special Offering Getting Started Manual

USING YoUR TURBo HUB

Connecting your computer through an Ethernet cable
• Attach the enclosed Ethernet cable to one of the Ethernet connectors
(1 – 4) on the back of the Turbo Hub.
• Connect the other end of the Ethernet connector to a PC/laptop.
• launch your Internet browser and you're online.
You can connect up to four (4) computers using the Ethernet ports. one shielded
Ethernet cable is included.
Note: If connecting additional PCs, use only shielded Ethernet cables in order to
fulfill electrical emissions requirements (CE, FCC).
Connecting your device through Wi-Fi
Wi-Fi security has been enabled on your Turbo Hub. To connect through Wi-Fi,
enter the following on your Wi-Fi-enabled PC/laptop or device:
• The Wi-Fi Network Name (SSID). You can find your Wi-Fi Network Name
(SSID) printed on the back of your Turbo Hub. The Wi-Fi Network Name
(SSID) will be BellXXXX, where XXXX is random numbers or letters.
• The WPA Passphrase. You can find your WPA Passphrase printed on the
back of the Turbo Hub, under the title "WPA/WPA2 – PSK Passphrase."
• launch your Internet browser and you're online.
Note: You can connect up to 15 devices using Ethernet and/or Wi-Fi.
6