Welcome and thanks for choosing Bell. Your new Turbo Hub will enable you to connect to the Internet. This guide will provide you with an overview of your Turbo Hub and steps for getting started. A Turbo Hub User Guide CD is included in the box for additional installation information.
SETUP Before using your Turbo Hub, please ensure you have the following: • A Bell Turbo Hub Flex Plan • Your Mobile Directory Number (MDN) or phone number If you don’t have an account or a Turbo Hub Flex Plan or number, get set up by speaking with a Bell account representative at 1-888-4MoBIlE (1-888-466-2453).
Inserting your Bell SIM card Before turning the device on, follow the steps below: 1. locate the SIM card slot on the back of the device. 2. Gently insert your Bell SIM card into the SIM card slot. 3. Ensure that the SIM card is inserted into the Turbo Hub with its bevelled edge facing up, as illustrated.
Connecting the power cord • Connect the cable from the enclosed power adapter to the power adapter input on the back of the Turbo Hub and insert the plug into an outlet. • Power on the device (press the round button on back of device). Power On/Off Button 2 -1...
Start-up • Allow approximately one minute for the Turbo Hub to boot/start-up. When the start-up procedure is finished, the following should occur: The Power button will show amber for a moment and then turn to a steady green. A solid amber light indicates the unit has failed to power-on.
USING YoUR TURBo HUB Connecting your computer through an Ethernet cable • Attach the enclosed Ethernet cable to one of the Ethernet connectors (1 – 4) on the back of the Turbo Hub. • Connect the other end of the Ethernet connector to a PC/laptop. •...
TRoUBlESHooTING Button and LED indicator legend Below is a list of lED indicators & buttons which outline the status of your Turbo Hub: LED Symbol Status Description Press this button to open a 2-minute window for the Turbo Hub to connect with other WPS-enabled devices. For more information about this function, see the Using Push ‘N’...
Page 9
LED Symbol Status Description Solid blue The Wi-Fi local port is initialized. Wi-Fi Data is being transmitted or received over Blinking blue the Wi-Fi link. The wireless access point is turned off. The local Ethernet ports have detected wired Solid green links with PCs.
Page 10
TRoUBlESHooTING (cont’d...) Button and LED indicator legend LED Symbol Status Description Solid blue Excellent coverage detected. Solid green Good coverage detected. Signal Quality Solid amber Minimal coverage detected. No coverage detected.
TRoUBlESHooTING (cont’d...) FAQs Q: What should I do if my Turbo Hub will not turn on? Make sure that the Turbo Hub power button has been turned on, and that the power cord is correctly connected to your Turbo Hub and a functioning power outlet.