Start-Up - NETGEAR MBR1210-1BMCNS - This Product is a Special Offering Getting Started Manual

Start-up

• Allow approximately one minute for the Turbo Hub to boot/start-up.
When the start-up procedure is finished, the following should occur:
1. The Power button
turn to a steady green. A solid amber light indicates the unit has failed
to power-on.
2. When a high-speed connection is established to the Bell HSPA+
network, the 2G/3G indicator
3. The Wi-Fi indicator
4. The Internet Port indicator
5. The Signal Quality indicator
from the Bell HSP+ network.
a. Solid blue: Excellent coverage
b. Solid green: Good coverage
c. Solid amber: Minimal coverage
d. off: No coverage
If any of these conditions does not occur, refer to the Troubleshooting section
starting on page 7.
5
will show amber for a moment and then
will be lit up in solid blue.
will show solid blue.
will show green.
shows the quality of the signal