Status Information - NETGEAR RN12P0610-100NAS - ReadyNAS 3200 RN12P0610 NAS Server Hardware Manual

Status Information

You can obtain information about the status of your unit by reviewing the indicators listed in
the following table.
Table 4. Status information
Indicator
Power LED
Disk LED on control panel
Ethernet LEDs (front panel) The Ethernet port LEDs have these states:
Ethernet port LEDs (rear
panel)
Fan LED
Disk LEDs on disk trays
NETGEAR ReadyNAS Rack-Mount Storage Systems
Description
The power LED has these states:
• Green. The unit is powered on.
• Red. Power failure.
• Off. The unit is powered off.
The LED indicates disk activity as follows:
• Blinking. A disk is active.
• Off. No disk is inactive.
• Green. An Ethernet cable is connected.
• Blinking. An Ethernet cable is active.
• Off. An Ethernet cable is disconnected.
Two LED status indicators are built into these ports. The left LED
indicates port activity. The right LED indicates connection speed
as follows:
• Amber. The port is operating at 1 Gbps.
• Green. The port is operating at 100 Mbps.
• Off. The port is operating at 10 Mbps.
The fan LED has these states:
• Red. Overheating or fan failure.
• Off. Normal operation.
The top LED indicates disk activity as follows:
• Blinking. The disk in the bay is active.
• Off. The disk in the bay is inactive.
The bottom LED indicates disk failure, as follows:
• Off. Normal operation
• On. Disk failure
ReadyNAS 3100
19