Cisco NSS2000 - Gigabit Storage System Chassis Release Notes page 5

Release Notes for the NSS2000 Series Firmware Version 1. 1 6
There is no workaround.
• CSCsv47151
When you create a share by using the Initial Setup wizard and enable NFS,
users are assigned root privilege access.
The workaround is to not enable NFS in the Initial Setup wizard. If NFS is
required, you can enable it at a later time by using the Configuration GUI.
• CSCsv47178
When the NSS sends out a broadcast message to discover an NIS server,
the broadcast is only sent to the physical interfaces, not over any VLANs
that are defined in the system.
The workaround is to not use the NSS in networks where NIS servers are
only accessible over VLANs.
• CSCta50061
If a user was granted write access to a share and the write access was
revoked, the user can still write to subfolders by using FTP and NFS.
This problem only occurs under these conditions:
- The user has write privileges to the subfolder (either because the user is
the owner, or was granted access by the owner).
- The user has read privileges to the share (by having explicit share read-
only access).
The workaround is to not enable FTP and NFS (which is disabled by
default), if these protocols not being used.
• CSCta87135
When using filenames with Chinese characters, characters are lost when
transferring the files to the NSS by using the FTP protocol.
The workaround is to use the CIFS protocol.
.
Release Notes
5