D-Link DCS-3420 - Wireless Day And Night Internet Camera Network User Manual page 49

Wireless day & night internet camera
Hide thumbs Also See for DCS-3420 - Wireless Day And Night Internet Camera Network:
Table of Contents

Advertisement

Section 3 - Configuration
There are four conditions related to the digital input and up to three windows for motion detection. There
Trigger Condition:
can be multiple selections. Select the appropriate digital input condition according to the characteristics of
the external device. High or low indicate external voltage input for level trigger, while rising or falling is for
edge triggers. There are three windows shown for the names you defined for motion detection. Undefined
will show instead of the window title if motion detection is not setup yet. An active, named motion window
must be checked for motion detection operation.
Trigger action defines what action the camera will take after the trigger condition is matched. The camera
Trigger Action:
will be able to trigger output alarm (optimal requires Digital Outout setup. Please refer to page 57 for more
information.) or upload the snapshots.
Reset Output:
Check and save this option to reset the external device at the digital output back to the original state.
Sequential
The camera will send snapshots to the external server (FTP, Email) continuously, based on the snapshot
operation:
interval. These settings will correspond with the Weekly Schedule (Sun ~ Mon) that is specified in
Applications settings.
Send snapshots
Any upload action specified in the options above will use the method chosen here. The captured snapshot
by email:
named "video.jpg" will be attached in the email with subject "Periodic snapshots."
Send snapshots
The captured snapshots will upload to the external FTP server with the file name depending on the "FTP
by FTP:
put snapshots with date and time suffix" option.
FTP put
If the suffix is added, the captured date and time can be easily differentiated from the snapshot file name in
snapshots with
either sequential or event operation. For instance, "video@20020102030405.jpg" means the JPEG image
date and time
was captured at 4 minutes and 5 seconds after 3 o'clock, January 2nd, A.D. 2002. If the suffix is omitted,
suffix:
the file named "video.jpg" on the external FTP server will be refreshed at the specified interval.
D-Link DCS-340 User Manual
4

Advertisement

Table of Contents
loading

Table of Contents