Section 3 - Configuration
Security:
Select the encryption type from the drop-down list. The default setting for the encryption is None, which
means the security is disabled.
This Key allows the camera to connect to other devices by using WPA-PSK encryption. Pre-shared key
Pre-shared Key:
must be 8-63 characters or 64 hex characters.
Auth mode:
Choose one of the following authorization modes:Open Autenication- Communicates the key across
the network. Shared Authentication- Allows communication only with other devices with identical WEP
settings.
Select the key length, either 64 or 128 bits.
Key Lenght:
Select an ASCII or hexadecimal key format.
Key Format:
Default Key:
You can create up to 4 different security keys.
D-Link DCS-340 User Manual
3