Table of Contents
Advertisement
Installation Steps
Figure 4 illustrates the cabling for the Cisco ATA 186. Figure 5
illustrates the cabling for the Cisco ATA 188.
Before powering up the Cisco ATA, perform any
Note
necessary configuration tasks. Refer to the Cisco ATA
administrator guide for your particular signaling image
protocol (SCCP, MGCP, H.323 or SIP), available on the
World Wide Web at the following location:
http://www.cisco.com/univercd/cc/td/doc/product/voic
e/ata/index.htm
13
Advertisement
Table of Contents
