Table of Contents
Advertisement
Making a Call
Lift the telephone handset. Make a call as you normally do. You
will hear ringing if the called party is available. When the called
party answers, speak normally and hang up when finished. You
can cancel or discontinue your call at any time by hanging up
the handset. You can make a separate, simultaneous telephone
call by using the second handset connected to the ATA.
Your service provider or system administrator might
Note
offer a different dial plan. If you cannot place calls
using the preceding instructions, contact your service
provider or system administrator for assistance.
Troubleshooting Tips
The suggestions in this section are general troubleshooting tips.
• Make sure that the DHCP server is operating correctly.
Note that the function button blinks slowly when the
Cisco ATA attempts to acquire the DHCP configuration.
• If the green activity LED is not flashing after you connect
the Ethernet cable, make sure that both the power cord and
the Ethernet connection are secure.
25
Advertisement
Table of Contents
