Cisco 7961G - IP Phone VoIP Administration Manual page 197

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Table 8-2 Network Configuration Area Items (continued)
Item
Subnet Mask
TFTP Server 1
Default Router 1–5
DNS Server 1–5
Operational VLAN ID Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco
Admin. VLAN ID
CallManager 1–5
Information URL
Directories URL
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
Description
Subnet mask used by the phone.
Primary Trivial File Transfer Protocol (TFTP) server used by the phone.
Default router used by the phone (Default Router 1) and optional backup
routers (Default Router 2–5).
Primary Domain Name System (DNS) server (DNS Server 1) and optional
backup DNS servers (DNS Server 2–5) used by the phone.
Catalyst switch in which the phone is a member.
Auxiliary VLAN in which the phone is a member.
Host names or IP addresses, in prioritized order, of the
Cisco Unified CallManager servers with which the phone can register. An
item can also show the IP address of an SRST router that is capable of
providing limited Cisco Unified CallManager functionality, if such a router
is available.
For an available server, an item will show the Cisco Unified CallManager
server IP address and one of the following states:
Active—Cisco Unified CallManager server from which the phone is
•
currently receiving call-processing services.
Standby—Cisco Unified CallManager server to which the phone
•
switches if the current server becomes unavailable.
Blank—No current connection to this Cisco Unified CallManager server.
•
An item may also include the Survivable Remote Site Telephony (SRST)
designation, which identifies an SRST router capable of providing
Cisco Unified CallManager functionality with a limited feature set. This
router assumes control of call processing if all other
Cisco Unified CallManager servers become unreachable. The SRST
Cisco Unified CallManager always appears last in the list of servers, even if
it is active. You configure the SRST router address in the Device Pool section
in Cisco Unified CallManager.
URL of the help text that appears on the phone.
URL of the server from which the phone obtains directory information.
Network Configuration
8-7