Weight; Connectors; Ide Cables; Environmental Specifications - Sony AIT-SDX560 Product Specifications Manual

2. Specification

Weight

2.1.2.
SDX-560V/P 780 grams, without a cassette and a front bezel.
SDX-560V/RP 1050 grams, without a cassette and a front bezel.

Connectors

2.1.3.
The SDX-560V has a IDE connector with a power connector and Jumpers at the positions shown in Figure 2-3. All
other connectors are for use by Sony's manufacturing and service facilities only.

IDE Cables

2.1.3.1.
ATA/ATAPI-6 configuration are supported by SDX-560V.
The hardware specification of this interface can be found in Annex A connectors and cable assemblies of the ANSI
INCITS 361-2002.

2.2. Environmental Specifications

The specifications which apply when media is present may be different than these.

Temperature and Humidity Range

2.2.1.
Temperature
Operating
Non-Operating (mech.)
Non-Operating (tape)
Humidity
Operating
Non-operating (mech.)
Non-operating (tape)
Note: Please keep cool the drive's heatsink.

Altitude

2.2.2.
Operating
2-4
Jumpers
IDE Connector
Figure 2-3: Connector Positions
5 °C to 40 °C ( T < 10 °C/h)
-40 °C to 70 °C ( T < 20 °C/h)
-40 °C to 45 °C ( T < 20 °C/h)
20 to 80% RH, non-condensing
Maximum wet bulb temperature: 26 °C
5 to 95%RH ( RH<30%/h)
Maximum wet bulb temperature: 45 °C
20 to 80%RH ( RH<30%/h)
0 to 10,000 feet
Power Connector
SONY AIT-2 Turbo drive SDX-560V series Ver.1.0