Table of Contents
Advertisement
7. ATAPI Packet Command Specification
7.19. REWIND 01h
Bit
7
Byte
0
1
2
3
4
5
6
7
8
9
10
11
The REWIND command causes the Device to position to the beginning-of-partition in the current partition. Prior
to performing the rewind operation, the Device shall ensure that all buffered data and filemarks have been
transferred to the medium.
An Immed (immediate) bit of zero indicates the Device shall not return status until the operation has completed.
An Immed bit of one indicates that the target shall return status as soon as all buffered commands have
completed execution and the CDB has been validated. If CHECK CONDITION status is returned when the Immed
bit is set to one, the operation shall not be performed.
7-60
6
5
4
Operation Code (01h)
Reserved
3
2
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
SONY AIT-2 Turbo drive SDX-560V series Ver.1.0
REWIND
1
0
Immed
Advertisement
Table of Contents
