Installing The Lcd Tv; Installing The Stand; Disconnecting The Stand - ViewSonic VT3205LED User Manual

Getting Started

Installing the LCD TV

Installing the Stand

1. Lay the TV flat on a table with the LCD screen face down. To prevent the TV from being
scratched, put a piece of soft cloth on the table on which the screen will be set. (see Figure 1)
2. Remove the 3 screw from the wall-mount cover. (see Figure 2)
3. Pull off the wall-mount cover slowly. (see Figure 3)
4. Then align the hinge cover from the stand with the back cover like shown above. (see
Figure 4)
5. Use screw driver or other tools (not included) to screw (5 screws total) on the hinge cover.
(see Figure 5)

Disconnecting the Stand

1. Lay the TV flat on a table with the LCD screen face down. To prevent the TV from being
scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Remove the 5 screws from the hinge cover, then pull off the arm slowly, as shown below. (see
Figure 1 and Figure 2)
3. Then connect the wall-mount cover to the back cover like shown below. (see Figure 3)
4. Use the screw driver or other tools (not included) to screw (total of 3). (see Figure 4)
ViewSonic
2
VT3205LED