Conference Call - Sharp GX20 User Manual

Conference Call

Conference call is a call with more than 2 participants.
You may include up to 5 participants in a conference
call.
To Make a Conference Call
To make a conference call, you must have one active
call and one held call.
Press A [Options] to display the Options menu.
1.
2.
Press or to highlight "Multiparty", then
press or A [Select] to select.
3.
Press or to highlight "Conference All", then
press to join the conference call.
Press F to end the conference call.
4.
Note
• Conference call service may not be available on all
networks. Contact your network operator for more
information.
• You have more options for the Conference call in step
3:
• To put all participants on hold, select "Conference
Hold All".
• To put all participants except the current call on
hold, select "Private".
• To end the call with all participants, select
"Release All".
26 Call Functions
• To disconnect from the conference call but still
allow the other participants to continue talking
together, select "Transfer".
• To put the current call on hold and continue to
have a conference call with the remaining
participants, select "Exclude".
• To reject adding more participants to the current
party, select "Reject", or you can send the busy
tone by selecting "Busy".