Sharp GX20 User Manual page 157

Note
• When a divert is set to "All Calls", "
on the stand-by screen.
Tip
• If you select "By Service" in step 5, you can select
further divert options in the selected option in step 4.
Checking the Divert Status
1.
Perform steps 1 to 3 in "Diverting Calls" on
page 148.
2.
Press or to highlight the divert option you
wish to check, then press
3.
Press or to highlight "Status", then press
to select.
You can now check the status of the selected divert
option.
When you have finished, press C [Back].
4.
Cancelling All Divert Settings
1.
Perform steps 1 to 3 in "Diverting Calls" on
page 148.
2.
Press or to highlight "Cancel All", then
press to select.
Press A [Yes].
3.
To cancel resetting, press C [No] in step 3.
" is displayed
to select.
4.
Press .
All divert settings are cancelled.
To Cancel the Divert Settings Individually
1.
Perform steps 1 to 3 in "Diverting Calls" on
page 148.
2.
Press or to highlight the divert option you
wish to cancel, then press
3.
Press or to highlight "Off", then press
select.
4.
Press .
The selected divert has been cancelled.
to select.
to
Settings 149