Sharp GX20 User Manual page 147

Quick start guide
Hide thumbs Also See for GX20:
Table of Contents

Advertisement

3.
Press
(Light) or
brightness for maximum clarity.
4.
Press
.
Note
• The brightness of the backlight above does not affect
the brightness of the external display.
Setting the Display Saving
This phone's screen will automatically turn off after a
given amount of time if the phone is left open. This is
in order to conserve battery life.
You can change the time before the Display Saving will
go into effect from between 2 and 20 minutes.
Tip
• When you purchase this phone, Display Saving is set
to 10 minutes.
1.
Perform steps 1 to 4 in "To Set Built-in Animation
or Pictures of the Main Display" on page 136.
2.
Press
or
to highlight "Display Saving", then
press
to select.
3.
Enter the time before Display Saving takes effect in
two digits (02 to 20 minutes) using the digit keys,
then press
.
(Dark) to adjust the
Note
• Display Saving does not work whilst you are calling,
using WAP, or using an application.
To Cancel the Display Saving Function
The display saving continues until either a key is
pressed or there is an incoming alert. The first key press
only cancels the Display Saver. You must press another
key in order to input any numerical or text value.
Setting the Greeting Message
You can set the message which will appear when the
phone is turned on.
1.
Perform steps 1 to 4 in "To Set Built-in Animation
or Pictures of the Main Display" on page 136.
2.
Press
or
to highlight "Greeting Message",
then press
to select.
3.
Press
or
to highlight "On", then press
select.
4.
Enter the message, then press
Up to 16 characters can be stored as a message.
For details on entering characters, see "Entering
Characters" on page 29.
Tip
• To cancel the Greeting Message setting, select "Off"
in step 3.
to
.
Settings
139

Advertisement

Table of Contents
loading

Table of Contents