Reassembling Your Blender Jug After Cleaning - Breville BBL410 Manual

Operating Your Breville Power Blender
.
Remove the blade assembly by upturning the blender
jug and twisting the Blade Assembly anti-clockwise
to unlock, then lift upwards and away from the base
of the blender jug. The plastic surround attached to
the base of the blender jug is not removable.
NOTE
The inner measuring cup also doubles as a blade
assembly removal tool and can be used to assist in
removing the blade assembly.
Reassembling your blender jug after
cleaning
1.
Ensure parts are clean and completely dry.
.
To reassemble the blender, replace the silicon seal
onto the blade assembly.
'PULSE/ICE CRUSH' CAN BE ACTIVATED IN 'OFF' POSITION, wE RECOMMEND SwITCHING OFF AT THE POwER
OUTLET AND REMOVE POwER CORD.
BE CAREFUL wHEN HANDLING THE BLENDING BLADES AS THEY ARE SHARP. MISHANDLING OF THE BLADES
MAY CAUSE INJURY.
BBL410_IB_FA.indd 9
continued
.
Upturn the blender jug and insert the blade assembly
housing into the jug base. Turn in a clockwise
direction until firmly in position.
4.
Place the inner measurement cup into the lid and
turn until firmly locked into position.
1
2

13/7/09 1:29:50 PM