Installing The Software - NEC VERSA NOTE Manual

Click Install to launch the CD.
4.
The Applications and Drivers CD dialog box appears.

Installing the Software

The Applications and Drivers CD dialog box consists of the following
components.
T
Selection Tabs — Located just below the title bar, each tab represents
a software category. The selection tabs include applications, drivers,
utilities, and Internet browsers.
T
Description — Located in the bottom portion of the dialog box, the
text describes the selected or highlighted software category or
application, driver, etc.
T
Install — Clicking the Install button installs the selected software.
T
Exit — Clicking the Exit button closes the Applications and Drivers
CD dialog box.
Once the Applications and Drivers CD dialog box appears, follow these
steps to install the desired software.
Click the selection tab of your choice.
1.
Click the plus (+) box beside the desired application, driver, etc. to
2.
expand the selection.
Click the Installation selection to activate the Install button.
3.
Click the Install button to install your selection.
4.
Follow the on-screen instructions to install your selection.
Click Exit to close the Applications and Drivers CD dialog box.
5.
6. Remove the CD from the CD-ROM reader when the installation is
complete.
2-14 Understanding the Software