Enabling And Disabling Devices - NEC VERSA NOTE Manual

your NEC Versa Note that displays the USB icon.
Depending on your operational requirements, you
may need to disable the USB port in order release
system resources to use other devices.
For information about enabling and disabling
devices on your NEC Versa Note, see "Enabling and
Disabling Devices," later in this chapter.

Enabling and Disabling Devices

Depending on your operational requirements you may need to enable
and disable devices on your NEC Versa Note to optimize system
resources.
Follow these steps to enable or disable a device on your NEC Versa
Note:
1. Press Start, slide the cursor to Settings, and locate the Control Panel.
Double click the System icon and select Device Manager.
2.
Double click the appropriate device (for example, the Infrared Port),
3.
then double click the device name (e.g., NEC Versa Note Fast
Infrared Port).
Enable or disable a device as follows.
4.
T
To enable a device, click to remove the check mark beside
"Disable in this hardware profile" in the device usage portion of
the screen.
T
To disable a device, click to add the check mark beside "Disable
in this hardware profile" in the device usage portion of the
screen.
5. Click OK and follow the on-screen instructions, as appropriate.
appears beside the device name in the device
manager device list.
4-18 Using Your NEC Versa Note
Note:
Connect the USB device to the port on
Note:
When a device is disabled, a red X