System Care; Storage Requirements - NEC VERSA NOTE Manual

This equipment uses an ungrounded power
cable. Replace the cord if it becomes damaged.
U.S. and Canadian replacement cords must be
UL-approved (CSA certified in Canada) type
SPT-2, 18 AWG, 2-conductor cord with a
permanently attached NEMA type 5-15P plug at
one end, and a permanently attached connector
body on the other. Cord length may not exceed
15 feet.
Outside the U.S. and Canada the cord must be
rated for at least 250VAC at 10 amps, and must
indicate international safety agency approval.
The plug must be a type appropriate for the
country where it is used. Check with your local
dealer for HAR type 18 AWG, 2 conductor cord,
or better. (Reference the booklet, "Getting
Service and Support for Asia, Australia, and
Europe" to find out how to contact the local
office in your country.)
Obtain replacement cords at an authorized
service center. The replacement must be of the
same type and voltage rating as the original
cord.
Disconnect all supply lines before the hinged
front cover is removed. Replace the hinged
cover before the unit is restarted.

System Care

Storage Requirements

Store the computer and AC adapter in an environment that meets the
following conditions:
T
Maintain storage temperatures between –4ºF to 104ºF (–20ºC to
40ºC).
CAUTION
Getting Started 1-23