The wrong Processor Voltage (VR/VRE) jumper
setting could damage the system board processor.
Be sure the Processor Voltage jumper is set
correctly for your processor.
Reinstall any removed expansion boards (see "Replacing
5.
Expansion Boards" in Chapter 3).
Replace the system unit cover (see "Replacing the
6.
System Unit Cover" in Chapter 3).
Power on the system.
7.
BIOS RECOVERY
If an interruption occurs during the BIOS upgrade that
prevents continuation of the process, it is possible that the
BIOS may be left in an unstable state. Use the following
procedure to recover your BIOS.
Power off the system and unplug any peripherals.
1.
The system power must be off before removing the
cover and changing a jumper setting.
Remove the system unit cover (see "Removing the
2.
System Unit Cover" in Chapter 3).
!
CAUTION
!
WARNING
Setting System Board Jumpers 5-5