Installing The 5 1/4-Inch Device - NEC POWERMATE P ETC User Manual

Remove the slot cover from the selected slot on the
4.
chassis.
Install the device (see the following section "Installing
5.
the 5 1/4-Inch Device").

Installing the 5 1/4-Inch Device

Install an accessible device into the device cage as follows.
Follow the preinstallation instructions that come with the
1.
device, such as setting jumpers and switches.
If installing the device in the middle or top slots, go to
2.
Step 4. Otherwise, continue with Step 3.
Attach rails to the sides of the device.
3.
Removing the slot cover
Installing Options 3-39