Summary: Dhcp Table; Figure 9 Summary: Dhcp Table; Table 5 Summary: Dhcp Table - ZyXEL Communications P-320W User Manual

Table 4 Screens Summary
LINK TAB
Tools Firmware
Configuration
Restart

2.4.2 Summary: DHCP Table

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server
on your LAN, or else the computer must be manually configured.
Click the DHCP Table (Detail) hyperlink in the Status screen. Read-only information here
relates to your DHCP status. The DHCP table shows current DHCP client information
(including IP Address, Host Name and MAC Address) of all network clients using the
Prestige's DHCP server.

Figure 9 Summary: DHCP Table

The following table describes the labels in this screen.

Table 5 Summary: DHCP Table

LABEL
#
IP Address
Host Name
MAC Address
Refresh
Chapter 2 Introducing the Web Configurator
FUNCTION
Use this screen to upload firmware to your Prestige.
Use this screen to backup and restore the configuration or reset the factory
defaults to your Prestige.
This screen allows you to reboot the Prestige without turning the power off.
DESCRIPTION
This is the index number of the host computer.
This field displays the IP address relative to the # field listed above.
This field displays the computer host name.
This field shows the MAC address of the computer with the name in the Host Name
field.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal characters,
for example, 00:A0:C5:00:00:02.
Click Refresh to renew the screen.
P-320W User's Guide
41