Summary: Dhcp Table - ZyXEL Communications NBG4115 User Manual

Chapter 4 The Web Configurator
Table 8 Screens Summary
LINK
Tools
Sys OP Mode
Language

4.5.2 Summary: DHCP Table

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the NBG4115's LAN as a DHCP server or disable it. When configured as a
server, the NBG4115 provides the TCP/IP configuration for the clients. If DHCP
service is disabled, you must have another DHCP server on that network, or else
the computer must be manually configured.
Click the DHCP Table (Details...) hyperlink in the Status screen. Read-only
information here relates to your DHCP status. The DHCP table shows current
DHCP client information (including IP Address, Host Name and MAC Address)
of all network clients using the NBG4115's DHCP server.
Figure 10 Summary: DHCP Table
The following table describes the labels in this screen.
Table 9 Summary: DHCP Table
LABEL
#
IP Address
Host Name
46
TAB FUNCTION
Firmware Use this screen to upload firmware to your NBG4115.
Configuration Use this screen to backup and restore the
configuration or reset the factory defaults to your
NBG4115.
Restart This screen allows you to reboot the NBG4115 without
turning the power off.
General This screen allows you to select whether your device
acts as a Router or a Access Point.
Language This screen allows you to select the language you
prefer.
DESCRIPTION
This is the index number of the host computer.
This field displays the IP address relative to the # field listed above.
This field displays the computer host name.
NBG4115 User's Guide