NETGEAR ProSafe DGFV338 Reference Manual page 82

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
For example, if an inbound rule for a schedule is selected as Block Always, then for every
packet that tries to make an outbound connection for that service, a message with the packet's
source and destination addresses, along with other information will be recorded in the log.
Enabling logging may generate a significant volume of log messages and is recommended for
debugging purposes only.
Note: See
certain types of inbound traffic that would otherwise be blocked by the
firewall.
Additional actions that can be taken on the rules are:
• Edit: Modify the configuration of the selected rule.
• Select All: Selects all the rules in the table.
• Delete: Deletes the selected policy or policies.
• Enable: Enables the selected rule or rules.
• Disable: Disables the selected rule or rules.
• Add: Add a new rule.
To create a new inbound service rule:
1. Click Add under the Inbound Services table. The Add LAN-WAN Inbound Service will
appear.
Figure 4-5
4-10
"Setting up Port Triggering" on page 4-28
v1.0, April 2007
for yet another way to allow
Security and Firewall Protection