Wan Ports - NETGEAR ProSafe DGFV338 Reference Manual

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
Table 6-1. Router Status (continued)
Item Description
LAN Port Information These are the current settings for MAC address, IP address, DHCP role and Subnet
Mask that you set in the LAN IP Setup page. DHCP can be either Server or None.
WAN Port This indicates whether rollover mode is enabled and which LAN connection is
Information primary and which is secondary. It also notes whether NAT is Enabled or Disabled;
displays the current settings for MAC address, IP address, DHCP role and Subnet
Mask that you set in the Basic Settings page. DHCP can be either Client or None.
Note: The Router Status page displays current settings and statistics for your router. As
this information is read-only, any changes must be made on other pages.

WAN Ports

You can monitor the status of the ADSL and WAN Ethernet connections, Dynamic DNS services,
and Internet traffic information.
To monitor each WAN Port connection status:
1. Select Network Configuration from the main menu, WAN Setup from the submenu and
click either the ADSL ISP Settings or the Ethernet ISP Settings tab. Then select the l. The ISP
settings screen for the selected settings will display.
2. Click either the Ethernet Status or ADSL Status link. The current connection status for the
selected connection will display.
Figure 6-5
6-14
v1.0, April 2007
Router and Network Management