Default Settings and Technical Specifications
Default Factory Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the reset button for approximately 10 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
Table A-1
below.
•
Pressing the Reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Default Configuration Settings
Feature
Router Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Internet Connection
WAN MAC Address (Ethernet)
WAN MAC Address (ADSL)
WAN MTU Size
Port Speed
Local Network (LAN)
Lan IP Address
Subnet Mask
Gateway Address
RIP Direction
RIP Version
RIP Authentication
Default Settings and Technical Specifications
Default Behavior
http://192.168.1.1
admin
password
Use Default address
Use Default Address
1500
AutoSense
192.168.1.1
255.255.255.0
0.0.0.0
None
Disabled
None
v1.0, April 2007
Appendix A
A-1