Section 3: Set Up; About This Section; Items Needed For Set Up; Unpacking - Grizzly G3616 Owner's Manual

About This Section

The purpose of this section is to guide you
through the required steps to get your machine
out of its crate and into operating condition.
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses dur-
ing the entire set up pro-
cess!
The Model G3616/G3617
is a heavy machine.
Serious personal injury
may occur if safe mov-
ing methods are not fol-
lowed. To be safe, you
will need assistance and
power equipment when
moving
crate and removing the
machine from the crate.
16

SECTION 3: SET UP

the shipping
Items Needed for
Set Up
The following items are needed to complete the
set up process, but are not included with your
machine:
Description
• Flat Head Screwdriver ................................ 1
• Phillips Screwdriver, short handle .............. 1
• Safety Glasses (for each person) .............. 1
• 19mm Open-ended Wrench ....................... 1
• Solvent (for cleaning) ......................... Varies
• Shop rags (for cleaning) ..................... Varies

Unpacking

The Model G3616/G3617 was carefully packed
when it left our warehouse. If you discover the
machine is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory the
contents.
Qty
G3616/G3617 Mill