Casio YC-430 User Manual page 37

6.
When you are finished auto scanning, click the [Stop] button on the scanner window.
This causes the [Stop] button to change back to a [Start] button, and stops auto scanning.
7.
To quit scanning, display the operation bar and then select [Exit] on the [File] menu.
This exits PJ Camera Software and turns off the PJ Camera.
Using Files Created in the Scanner Mode
You can use image files you create in the Scanner Mode for projection in the Scanner Mode or the
PC Image Mode. See the following section for details about projecting image files stored on the
computer (PC Image Mode).
Projecting Image Files Stored on the Computer
(PC Image Mode)
With the PC Image Mode, you can create a projector presentation using image files recorded in the
Scanner Mode and saved on your computer's hard disk.
Projecting a Specific Computer Image File
1.
Display the operation bar, and then select [PC Image] on the [File] menu or click
the toolbar.
This enters the PC Image Mode and displays its preview list area and playlist area.
The preview list area shows the thumbnails of image files on your computer's hard disk, in
accordance with current PC Image Mode settings.
2.
In the preview list, select the thumbnail of the file whose image you want to project.
3.
Select [Full Screen] on the [View] menu or click
This projects the image whose thumbnail is selected in the preview list.
4.
Here, you could scroll forward or back through the files whose thumbnails are in the
preview list.
To scroll back to the image whose thumbnail comes before the current image in the preview
list, select [Back] on the [View] menu or click
To scroll forward to the image whose thumbnail comes after the current image in the preview
list, select [Forward] on the [View] menu or click
5.
To stop projecting, select [Full Screen Off] on the [View] menu or click
PJ Camera Software Overview and Basic Operations
on the toolbar.
on the toolbar.
on the toolbar.
on
on the toolbar.
E-37