Casio YC-430 User Manual page 26

Setting Up the Multi PJ Camera System
Folding Up the PJ Camera Stand
Perform the steps below to fold up the PJ Camera Stand for transport or storage. Note that you
can fold up the PJ Camera Stand without removing the PJ Camera.
1.
Make sure the PJ Camera is turned off, and that the stand light is off. Disconnect the
USB cable and AC adaptor from the PJ Camera Stand.
Folding up the PJ Camera Stand while the lens of the PJ camera is extended can damage
the camera.
2.
Remove the PJ Camera from the PJ Camera Stand, if you want.
3.
Fold the camera holder and the upper section of the arm unit into the lower section of
the arm unit.
Take care to avoid impact to the PJ Camera when folding the arm with the camera installed.
Be sure to fold the upper section of the arm unit first.
4.
Close the side panels of the document stage.
5.
Fold the arm unit onto the document stage.
Installing PJ Camera Software on a Computer
Before connecting the PJ Camera Stand and a projector to your computer, you need to install PJ
Camera Software from the CASIO CD-ROM that comes bundled with the Multi PJ Camera System.
For more information, see "Using the CASIO CD-ROM" on page E-15.
E-26