Configuring Display Language, Date, and Time Settings
The settings on this page are required the first time you turn on the camera after purchasing it.
1.
Press [ON/OFF] to turn on the camera.
2.
Use [ ], [ ], [ ], and [ ] to select the language you want and then press [SET].
3.
Use [ ], [ ], [ ], and [ ] to select the area where you will use the camera and then
press [SET].
4.
Use [ ] and [ ] to select the city where you will use the camera and then press [SET].
5.
Use [ ] and [ ] to select the summer time (DST) setting you want and then press
[SET].
6.
Use [ ] and [ ] to select the date format and then press [SET].
Example: December 19, 2007
To display the date like this:
07/12/19
19/12/07
12/19/07
7.
Set the date and the time.
Use [ ] and [ ] to select the setting you want (year, month, day, hour, minute) and then use
[ ] and [ ] to change the setting.
To switch between 12-hour and 24-hour format, press [BS].
8.
When all the settings are the way you want, press [SET].
9.
Press [ON/OFF] to turn off the camera.
After finishing this procedure, advance to the procedure on the next page.
[ON/OFF] (Power)
[ ]
[ ]
[ ]
[BS]
Select this option:
YY/MM/DD
DD/MM/YY
MM/DD/YY
Setting Up the Multi PJ Camera System
[ ]
[SET]
E-21