16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
The following example shows how to assign all the packets entering a port to the default port CoS value
of 4:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos cos 4
Switch(config-if)# mls qos cos override
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands
Command
mls qos map
mls qos trust
show interface fax/y switchport Displays switchport interfaces.
show mls qos interface
Description
Defines the CoS-to-DSCP map or the DSCP-to-CoS map.
Configures the port trust state.
Displays QoS information.
Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ
mls qos cos
199