Error Messages - Casio CW-K85 User Manual

Error Messages

Message
DATA ERROR!
• You are trying to operate the
INITIALIZE THE
printer without initializing its
PRINTER!
memory first.
• You unplugged the AC adaptor
or removed the batteries
before the printer was turned
off completely.
Press SET and then initialize
printer memory.
ENTIRE PHRASE • The text in the phrase
memory you are trying to
COULD NOT BE
RECALLED! recall will cause the number
of characters to exceed the
allowable limit for the location
where you are inserting it.
Re-input so the recalled
phrase memory text does not
cause the allowable number
of characters to be exceeded.
LINK ERROR! • The USB cable is not
connected securely to the
CHECK ALL
CONNECTIONS! USB port.
Plug the USB cable securely
into the USB port.
• The computer is shut down.
Start up the computer.
Cause and Action See page:
12
37
Read this
first
Message
LOW BATTERY! • Battery power is low.
Replace the batteries or use
the AC adaptor to power the
printer.
• Temperature is below 10˚C
(50˚F)
Move the printer to a location
where the temperature is
within the operating
temperature range (10˚C to
35˚C (50˚F to 95˚F)).
LOW BATTERY! • Battery power is low.
CONTINUE TO Replace the batteries or use
PRINT? the AC adaptor to power the
SET/ESC printer.
• Temperature is below 10˚C
(50˚F)
Move the printer to a location
where the temperature is
within the operating
temperature range (10˚C to
35˚C (50˚F to 95˚F)).
MEMORY FULL! • There is not enough memory
available to save the data you
are trying to save.
Delete memory data you no
longer need and try again.
Cause and Action See page:
10
10
44
49
E