Cisco 7604-RSP720C-R Configuration Manual page 51

Chapter 2 Configuring Basic Interface Parameters
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
interface ethernet slot/port
Example:
switch(config)# interface ethernet 3/1
switch(config-if)#
Step 3
link debounce time milliseconds
Example:
switch(config-if)# link debounce time 1000
switch(config-if)#
Step 4
show interface debounce
Example:
switch(config)# show interface debounce
switch(config-if)#
Step 5
exit
Example:
switch(config-if)# exit
switch(config)#
Step 6
copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
This example shows how to enable the debounce timer and set the debounce time to 1000 ms for the
Ethernet port 3/1:
switch# configure terminal
switch(config)# interface ethernet 3/1
switch(config-if)# link debounce time 1000
switch(config-if)#
This example shows how to disable the debounce timer for the Ethernet port 3/1:
switch# configure terminal
switch(config)# interface ethernet 3/1
OL-23435-03
configure terminal
interface ethernet slot/port
link debounce time milliseconds
show interface debounce
exit
copy running-config startup-config
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
Configuring the Basic Interface Parameters
Purpose
Enters configuration mode.
Specifies an interface to configure, and
enters interface configuration mode.
Enables the debounce timer for the
amount of time (0 to 5000 ms) specified.
Disables the debounce timer if you
specify 0 milliseconds.
Shows the link debounce time for all of
the Ethernet interfaces.
Exits the interface mode.
(Optional) Copies the running
configuration to the startup
configuration.
2-27