Disabling Vpcs - Cisco 7604-RSP720C-R Configuration Manual

Configuring vPCs
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Command
Step 3
exit
Example:
switch(config)# exit
switch#
Step 4
show feature
Example:
switch# show feature
Step 5
copy running-config startup-config
Example:
switch# copy running-config startup-config
This example shows how to enable the vPC feature:
switch# configure terminal
switch(config)# feature vpc
switch(config)#

Disabling vPCs

When you disable the vPC functionality, the device clears all the vPC configurations.
Note
BEFORE YOU BEGIN
Ensure that you are in the correct VDC (or use the switchto vdc command).
SUMMARY STEPS
1.
2.
3.
4.
5.
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
7-32
configure terminal
no feature vpc
exit
(Optional) show feature
(Optional) copy running-config startup-config
Purpose
Exits configuration mode.
(Optional) Displays which features are enabled on
the device.
(Optional) Copies the running configuration to the
startup configuration.
Chapter 7 Configuring vPCs
OL-23435-03