Custom Command - D-Link DCS-3110 User Manual

Megapixel poe network camera

Hide thumbs Also See for DCS-3110:

Table of Contents

Section - Configuration

Custom Command

Click Custom Command to open the Custom Command page. In this page, you

can set addition command buttons for controlling the PTZ scanner. A total of five

command buttons can be configured.

To add a new control button, follow the steps below.

1. In the Button name text box, enter the descriptive name for the control

button.

2. Refer to the PTZ scanner and enter the command.

3. Click Save to take effect and click Close to quit this page.

4. The new custom command button will be displayed in the main page.

NOTE :

If Custom camera is selected as the PTZ driver, the PTZ control buttons will not

take effect. Please go to Configuration > Camera control > Custom Command

to set the commands in the Control settings session. Please refer to the user manual of the PTZ scanner for the command.

D-Link DCS-3110 User Manual

Table of Contents