Optional Settings For Rds Functions - Yamaha RX-E100RDS Owner's Manual

Natural sound stereo receiver/natural sound compact disc player
Table of Contents

Advertisement

Optional settings for
RDS functions
The tuner has the following functions which make use of
the RDS data service. These are originally in operation
ON. However, you can turn these functions OFF, if so
desired.
SLEEP
A
REP
B
D
PEAK
FREQ PS/PTY/RT/CT
FREQ PS/
PTY/RT/CT
VOLUME
MD
TUNER
PRESET
MD REC
PTY SELECT
MODE
DUBBING
1
Select the FM band by pressing TUNER.
2
Press DISP to display the current time.
3
Press FREQ PS/PTY/RT/CT.
4
Each time you press PTY SEEK MODE the display
will change as follows:
1. CT = CLOCK (ON/OFF)
The tuner corrects the time of the built-in clock
automatically by synchronizing it with the CT data
on the RDS station being received.
DISP
DISP
TIME
C
PROG
RNDM
E
TAPE
PTY SEEK MODE
PTY SEEK
PTY SEEK START
MODE
START
TAPE
CD
AUX
TUNER
TAPE REC
TAPE
START
RECEIVING RDS STATIONS
• If you receive an RDS station of some other country, the
built-in clock is synchronized with the time setting of the
country.
• If the built-in clock is not yet set for the current time or
reset due to a power failure, etc., it will be set for the time
defs
of the CT data automatically, whether this setting is ON
or OFF.
2. LOCAL = CT (ON/OFF)
If the RDS station being received employs the
local time (summer time, etc.) data service, its time
is displayed in the CT mode.
3. A.M. = RDS (ON/OFF)
RDS stations are searched instead of all FM
stations by the automatic preset tuning operation
when the setting is ON. (Refer to page 10.)
4. RT SPEED: ±0
Changes the scrolling speed of the radio text
decreasing the value and, in turn, reducing the
speed.
Control Range: ±0 to ±3 (Preset value: ±0)
5
Choose the function ON or OFF by pressing PTY
SEEK START, confirming it in the display.
Press PTY SEEK START repeatedly to change the
value for RT SPEED.
• If there is no operation for about 20 seconds, this mode is
cancelled and turns into the frequency display. If the
station has PS data, it turns into the PS mode.
6
Press FREQ PS/PTY/RT/CT again to restore the
frequency display mode.
Getting Started
Playing CDs
E-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdx-e100Rx-e100

Table of Contents