DFE-530TX
Ethernet/Fast Ethernet Adapter for PCI Bus
Connecting for 10Mbps Ethernet
Category 3, Category 4, and Category 5 UTP cable, as well as
EIA/TIA-568 100-ohm STP cable, all qualify under Ethernet
cabling rules. The maximum cable run between the DFE-530TX
and the supporting hub is 100 meters. The cable must be straight
(not a crossover cable) with RJ-45 connector at each end. Make the
network connection by plugging one end of the cable into the RJ-45
jack of the DFE-530TX, and the other end into a port of the
supporting hub.
Software Installation
On account of the great variety of network environments for which
the DFE-530TX may be used, and revisions of those network
systems, the instructions for software installation are given as
README files on the DFE-530TX Software Diskette. Review the
root directory README for overview information, and for full
installation details, see the README and referenced instruction
files in the sub-directory appropriate to your network operating
system.
10
Installation