100-mbps fiber-optics adapter with sc connector (27 pages)
Summary of Contents for D-Link dfe-538tx
Page 1
PCI slot Note: To avoid static electric charges, please touch an unpainted screw on the outside of the power supply before installing or working with the DFE-538TX. • Turn off your computer and unplug the power cord. • Remove the back cover of your computer. (Refer to your computer’s manual if needed.)
Page 2
Installing the Drivers Installing the Drivers Installing the Drivers Installing the Drivers • TURN ON the computer. • Go to Settings>Control Panel>Network Double-click on the Network icon. At the “Network” window, click on the “Adapters” tab. Click “Add” Click on “Have Disk” Type in the CD-ROM drive letter.
Page 3
Click OK Click “OK” to accept the “Auto” speed mode. To choose a fixed speed mode, make a selection from the “Speed/Duplex Mode” pull-down menu. Click “OK” if you are not using IPX networking. (Type the IPX network number into the “Network Address” field, if you are using IPX networking.) Click “OK”...
Page 4
Checking the Installation Checking the Installation Checking the Installation Checking the Installation Go to Start>Settings>Control Panel Double-click on the Network icon. Under “Adapters,” check to see that the “D-Link DFE-538TX PCI Adapter” is displayed. Click “Close.” The installation is complete.